Bearing: | •• |
---|---|
Gearbox Type: | Metal |
Weight (g): | 66,2 |
Length (mm): | 40 |
Wide (mm): | 20,2 |
Height (mm): | 30,2 |
Servo type: | High Voltage |
Betriebspannung (V) LHV: | 7,4 - 16,8 |
Servos are part of the "RC system" and thus the basis of a remote-controlled model.
Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.
This version has an enormous actuating power, which is up to 34 kg by direct connection of a 3S or 4S LiPo battery and all this at a speed of 0.080 seconds! In addition, the servo is dust and waterproof (IP67) and can therefore be used in all weather conditions.
Our "Crawler Spec. Servos" are mainly used in 1:8 and 1:10 crawlers or other heavy vehicles which need a lot of power on the steering axle.
TECHNICAL DATA HIGHLIGHTS:
ATTENTION: Separate power supply (2S,3S or 4S LiPo with BEC / JST connector) necessary!
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!
Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.
This version has an enormous actuating power, which is up to 34 kg by direct connection of a 3S or 4S LiPo battery and all this at a speed of 0.080 seconds! In addition, the servo is dust and waterproof (IP67) and can therefore be used in all weather conditions.
Our "Crawler Spec. Servos" are mainly used in 1:8 and 1:10 crawlers or other heavy vehicles which need a lot of power on the steering axle.
TECHNICAL DATA HIGHLIGHTS:
- Servo Category: High-Torque & High Speed
- Operating Voltage: 7.4 - 16.8V HV
- Torque / Speed @ 12V: 26.0kg / 0.100sec/60°
- Torque / Speed @ 14.4V: 30.0kg / 0.090sec/60°
- Torque / Speed @ 16V: 33.0kg / 0.082sec/60°
- Torque / Speed @ 16.8V: 34.0kg / 0.078sec/60°
- Technology: Digital
- Motor Type: Brushless
- Gear Material: Reinforced steel
- Housing Material: AL6061 T6
- Waterproof Rating: IP67 water-proof
- Bearing: Metal ball bearings (2)
- Servo Arms: 1* Aluminum, 2* Plastic
- Size: 40.8*20.2*30.2 mm (Standard)
- Weight: 66,2 g
- Programmable: Yes with USB Interface Adapter # 2030110 (sold separately)
ATTENTION: Separate power supply (2S,3S or 4S LiPo with BEC / JST connector) necessary!
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!
ABSIMA
ABSIMA HV 3S/4S Digital Alu Servo LP34DBT Crawler-Spec. Waterproof
Product number:
9797151
Manufacturer number:
2030108
Additionally selected items:
Bearing: | •• |
---|---|
Gearbox Type: | Metal |
Weight (g): | 66,2 |
Length (mm): | 40 |
Wide (mm): | 20,2 |
Height (mm): | 30,2 |
Servo type: | High Voltage |
Betriebspannung (V) LHV: | 7,4 - 16,8 |
Servos are part of the "RC system" and thus the basis of a remote-controlled model.
Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.
This version has an enormous actuating power, which is up to 34 kg by direct connection of a 3S or 4S LiPo battery and all this at a speed of 0.080 seconds! In addition, the servo is dust and waterproof (IP67) and can therefore be used in all weather conditions.
Our "Crawler Spec. Servos" are mainly used in 1:8 and 1:10 crawlers or other heavy vehicles which need a lot of power on the steering axle.
TECHNICAL DATA HIGHLIGHTS:
ATTENTION: Separate power supply (2S,3S or 4S LiPo with BEC / JST connector) necessary!
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!
Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.
This version has an enormous actuating power, which is up to 34 kg by direct connection of a 3S or 4S LiPo battery and all this at a speed of 0.080 seconds! In addition, the servo is dust and waterproof (IP67) and can therefore be used in all weather conditions.
Our "Crawler Spec. Servos" are mainly used in 1:8 and 1:10 crawlers or other heavy vehicles which need a lot of power on the steering axle.
TECHNICAL DATA HIGHLIGHTS:
- Servo Category: High-Torque & High Speed
- Operating Voltage: 7.4 - 16.8V HV
- Torque / Speed @ 12V: 26.0kg / 0.100sec/60°
- Torque / Speed @ 14.4V: 30.0kg / 0.090sec/60°
- Torque / Speed @ 16V: 33.0kg / 0.082sec/60°
- Torque / Speed @ 16.8V: 34.0kg / 0.078sec/60°
- Technology: Digital
- Motor Type: Brushless
- Gear Material: Reinforced steel
- Housing Material: AL6061 T6
- Waterproof Rating: IP67 water-proof
- Bearing: Metal ball bearings (2)
- Servo Arms: 1* Aluminum, 2* Plastic
- Size: 40.8*20.2*30.2 mm (Standard)
- Weight: 66,2 g
- Programmable: Yes with USB Interface Adapter # 2030110 (sold separately)
ATTENTION: Separate power supply (2S,3S or 4S LiPo with BEC / JST connector) necessary!
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!