ABSIMA
ABSIMA HV Digital Full-Alu Servo LP20DBT 20KG Team-Spec. Low Profile
Product number:
9797146
Manufacturer number:
2030103
€89.95*
Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
| Bearing: | •• |
|---|---|
| Servo Speed sec./60° (4,8V) LHV: | 0,10 |
| Servo Speed sec./60° (6V) LHV: | 0,085 |
| Servo Speed sec./60° (7,4V) LHV: | 0,078 |
| Servo Speed sec./60° (8,4V) LHV: | 0,068 |
| Servo Torque kg/cm (4,8V) LHV: | 14,0 |
| Servo Torque kg/cm (6V) LHV: | 17,0 |
| Servo Torque kg/cm (7,4V) LHV: | 19,5 |
| Gearbox Type: | Metal |
| Weight (g): | 61 |
| Length (mm): | 40,8 |
| Wide (mm): | 20,2 |
| Height (mm): | 26,5 |
| Servo type: | High Voltage |
| Gear tooth: | 25 |
| Betriebspannung (V) LHV: | 4,8 - 8,4 |
| Stellkraft kg/cm (8,4V) LHV: | 20,0 |
Servos are part of the "RC system" and thus the basis of a remote-controlled model.
Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.
In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used.
Our "Team Spec." servos are mainly used in competition vehicles and offer a whole range of excellent features:
TECHNICAL DATA HIGHLIGHTS:
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!
Connected to the steering linkage, they convert stick or rotary movements on the transmitter into steering movements on the vehicle. In combustion vehicles, they also act as throttle servos, operating both the throttle valve of the carburetor and the brake. A servo that is too weakly dimensioned has a longer actuating time and a shorter service life when loaded. Therefore never save on the servo! A good servo does not have to cost a lot, but it makes the model more reliable and lasts for years.
In 1/8 and 1/10 scale RC cars, only standard size or low-profile servos are used.
Our "Team Spec." servos are mainly used in competition vehicles and offer a whole range of excellent features:
TECHNICAL DATA HIGHLIGHTS:
- Servo Category: High-Speed / Low Profile
- Operating Voltage: 4.8 - 8.4V HV
- Torque / Speed @ 4.8V: 14.0kg / 0.100sec/60°
- Torque / Speed @ 6.0V: 17.0kg / 0.085sec/60°
- Torque / Speed @ 7.4V: 19.5kg / 0.078sec/60°
- Torque / Speed @ 8.4V: 20.0kg / 0.068sec/60°
- Technology: Digital
- Motor Type: Brushless
- Gear Material: Reinforced steel
- Housing Material: AL6061 T6
- Waterproof Rating: IP65 water-resistant
- Bearing: Metal ball bearings (2)
- Size: 40.8*20.2*26.5 mm
- Weight: 61,0 g
- Programmable: Yes with USB Interface Adapter # 2030110 (sold separately)
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!