KAVAN
KAVAN GO-1088MGW (0.125s/60°, 74kg.cm) Brushless Servo
Product number:
9801773
Manufacturer number:
KAV20.1088MGW
€131.59*
Not in stock. Available only by special order in approx. 7 to 21 business days.
| Bearing: | •••• |
|---|---|
| Servo Speed sec./60° (4,8V) HV: | 0,19 |
| Servo Speed sec./60° (6V) HV: | 0,165 |
| Servo Speed sec./60° (7,4V) HV: | 0,135 |
| Servo Speed sec./60° (8,4V) HV: | 0,125 |
| Servo Torque kg/cm (4,8V) HV: | 45 |
| Servo Torque kg/cm (6V) HV: | 55 |
| Servo Torque kg/cm (7,4V) HV: | 65 |
| Servo Torque kg/cm (8,4V) HV: | 74 |
| Gearbox Type: | Metal |
| Weight (g): | 85 |
| Length (mm): | 40 |
| Wide (mm): | 20 |
| Height (mm): | 40,5 |
| Servo type: | High Voltage |
| Betriebspannung (V) HV: | 4,8 - 8,4 |
Super high torque/high speed waterproof programmable digital standard 85g brushless servo with a magnetic encoder, quadruple BB-ed hardened steel gears. Works great in large/giant planes, helicopters, 1:8–1:5 off-road RC cars, speed boats, sailboats etc. An waterproof/dustproof (IP67 standard) all-aluminium case for perfect cooling under high load and thorough protection.
GO-1088MGW is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
Wide input voltage range 4.8-8.4 V (nominal).
25T/5.92 mm output shaft.
GO-1088MGW is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
- Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
- Servo Neutral: Servo neutral (centre) position setting.
- Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
- PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
- Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
- Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
- Reverse: Reverses the servo movement direction.
- Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
- SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
- Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
- Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
- Default: Restores the factory default setting of the connected servo.
Wide input voltage range 4.8-8.4 V (nominal).
25T/5.92 mm output shaft.