FEATURES
- Powerful S.BUS2 digital servo with plastic gearbox
- Low-wear potentiometer
- Robust plastic housing
- High resolution
- High positioning accuracy

DESCRIPTION
Robust universal servo with large positioning force of 41 Ncm. High vibration resistance and a long service life due to wireless mounting technology. The reset potentiometer has a 6-fold sliding contact with indirect drive. State-of-the-art technology at an affordable price.

Programmable by S.BUS2 technology. Of course all S.BUS2 servos can be connected to conventional receivers with PWM modulation. The addressing of the servos can be done in different ways:

1. with the handy SBC-1 programmer
2. at the PC with the USB adapter CIU-3
3. at the S.BUS connection of the transmitter

The following parameters can be set:
- S.BUS channel assignment
- Servo reverse polarity
- Servo type (Normal / Retract)
- Soft start (On / Off)
- Mode selection in case of signal failure Hold or Free
- Soft servo run (On / Off)
- Servo position (Servo tester)
- Servo center adjustment +/- 300 µs (approx. 30 degrees)
- Servo speed, 0.39 - 9 seconds per 45 degrees
- Deadband adjustment (deadband)
- Servo travel adjustment left and right separately, approx. 50 - 175%.
- starting force
- damping
- holding force
- ID storage

TECHNICAL DATA
- positioning speed 60°: 0.19 / 0.23 s (6.0 / 4.8 V)
- positioning torque: 4,1 / 3,2 kgcm (6,0 / 4,8 V)
- Operating voltage: 4.8 - 6.0 V
- Control frequency: 50 - 70 Hz
- Weight: 36 g
- Dimensions: 40.4 x 19.8 x 36 mm