Skip to main content

FREE SHIPPING from € 99,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 99,- / DE / AT

Servo Speed sec./60° (4,8V) HV: 0,20
Servo Speed sec./60° (6V) HV: 0,16
Servo Speed sec./60° (7,4V) HV: 0,1
Servo Torque kg/cm (4,8V) HV: 3,6
Servo Torque kg/cm (6V) HV: 4,2
Servo Torque kg/cm (7,4V) HV: 23
Gearbox Type: Metal
Weight (g): 18
Length (mm): 29,5
Wide (mm): 12
Height (mm): 31,2
Servo type: Digital
Gear tooth: 25
Betriebspannung (V) HV: 4,8 - 6,0

Suitable for RC model aircraft and boats. Do not use in carbon wings with RDS. Voltage of potentiometer on the gear must be isulated to carbon parts.

Warning - Potential problems with this servo!

This servo features metal gears, and the potentiometer operating voltage is passed to the servo’s metal output shaft. If an aluminium control surface horn or a non-insulated RDS linkage is used with the servo, and if an electrically conductive contact with the airframe also exists - e.g. in an all-carbon model - the servos will interact with each, as the aforesaid voltage is transmitted between them. You can avoid this problem either by using a plastic control surface horn, or by insulating the servo mount in such a way that no electrical connection exists.

As manufacturer, Graupner/SJ GmbH recommends the exclusive use of accessories which have been tested and approved by Graupner/SJ, as this ensures that they are fit for purpose, work correctly and are safe. If you observe this advice, Graupner/SJ accepts liability to you for the product. Graupner/SJ is not in a position to assess the safety risk of every individual product made by other companies. For this reason we deny all liability If you use non-approved components, or accessories made by other manufacturers.

FEATURES
  • Digital servo featuring dynamic torque, excellent Speed, superior response and holding torque
  • Programmable Digital Circuit and SMT circuitry
  • 1024 high resolution
  • Supporting 1-16µ depending on programming
  • Supports a wide range of frame rates 20Hz-400Hz
  • 10-bit processing circuit


Graupner, based in Kirchheim, Germany, was founded by the family Graupner and, up until March 2013, operated under the third Graupner generation from Stefan Graupner. In March 2013, the company was purchased by the manufacturer of Graupner HoTT RC Transmitter Systems. Graupner covers a large RC assortment including RC Cars and Trucks (GM), Helicopters, Airplanes, RC Electronics (HoTT 2,4GHZ), Chargers, RC Glow-Powered Motors (OS) as well as a large variety of Electric-Powered Brushless Motors. Graupner supplies around 2000 retailers throughout the world.

GRAUPNER
GRAUPNER DES 567 MG DIGITAL SERVO
Product number: 78317
Manufacturer number: 7923

€39.90*

% €54.90* (27.32% saved)

In stock. Usually ships within 1 business day.

Servo Speed sec./60° (4,8V) HV: 0,20
Servo Speed sec./60° (6V) HV: 0,16
Servo Speed sec./60° (7,4V) HV: 0,1
Servo Torque kg/cm (4,8V) HV: 3,6
Servo Torque kg/cm (6V) HV: 4,2
Servo Torque kg/cm (7,4V) HV: 23
Gearbox Type: Metal
Weight (g): 18
Length (mm): 29,5
Wide (mm): 12
Height (mm): 31,2
Servo type: Digital
Gear tooth: 25
Betriebspannung (V) HV: 4,8 - 6,0

Suitable for RC model aircraft and boats. Do not use in carbon wings with RDS. Voltage of potentiometer on the gear must be isulated to carbon parts.

Warning - Potential problems with this servo!

This servo features metal gears, and the potentiometer operating voltage is passed to the servo’s metal output shaft. If an aluminium control surface horn or a non-insulated RDS linkage is used with the servo, and if an electrically conductive contact with the airframe also exists - e.g. in an all-carbon model - the servos will interact with each, as the aforesaid voltage is transmitted between them. You can avoid this problem either by using a plastic control surface horn, or by insulating the servo mount in such a way that no electrical connection exists.

As manufacturer, Graupner/SJ GmbH recommends the exclusive use of accessories which have been tested and approved by Graupner/SJ, as this ensures that they are fit for purpose, work correctly and are safe. If you observe this advice, Graupner/SJ accepts liability to you for the product. Graupner/SJ is not in a position to assess the safety risk of every individual product made by other companies. For this reason we deny all liability If you use non-approved components, or accessories made by other manufacturers.

FEATURES
  • Digital servo featuring dynamic torque, excellent Speed, superior response and holding torque
  • Programmable Digital Circuit and SMT circuitry
  • 1024 high resolution
  • Supporting 1-16µ depending on programming
  • Supports a wide range of frame rates 20Hz-400Hz
  • 10-bit processing circuit


Graupner, based in Kirchheim, Germany, was founded by the family Graupner and, up until March 2013, operated under the third Graupner generation from Stefan Graupner. In March 2013, the company was purchased by the manufacturer of Graupner HoTT RC Transmitter Systems. Graupner covers a large RC assortment including RC Cars and Trucks (GM), Helicopters, Airplanes, RC Electronics (HoTT 2,4GHZ), Chargers, RC Glow-Powered Motors (OS) as well as a large variety of Electric-Powered Brushless Motors. Graupner supplies around 2000 retailers throughout the world.