Skip to main content

FREE SHIPPING from € 100,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 100,- / DE / AT

PowerBus to PWM Adapter . Converts the bus signal into conventional servo signals. With fuse protection for all outputs.

Features:
- Operating voltage 4.0V - 9.0V
- Power supply 2S LiPo, 2S LiFePo, 5S NiCd/NiMH
- Current carrying capacity 20A
- Signal Input PowerBus
- Channels 18
- Servo outputs, total 4
- Servo pulse resolution 0.5µs
- Dimensions 59 x 33 x 9 mm
- Temperature range -30°C to +75°C

The PowerBus enables a completely new structure of servo cabling. The PowerBus consists of a three-wire cable that supplies connected servos with power and signal. At first glance, this is nothing unusual, but the big difference lies in the signal line: with conventional servo signals, only the information for a single servo can be transmitted - by means of a PWM modulated signal, also called pulse width modulation. With a servo bus system, the information for several servos is transmitted on a digital basis. The information for the individual servos is addressed. Because each individual servo is in turn assigned an address, the servo - provided it has a decoder - can read its information from the data stream and convert it into a movement at the rudder.

Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

PowerBox-Systems GmbH
Ludwig-Auer-Straße 5
86609 DONAUWÖRTH
DEUTSCHLAND
Tel: 0049/906/99999-200
[email protected]

POWERBOX SYSTEMS POWERBUS TO PWM ADAPTER WITH FUSE FOR "NORMAL NON-BUS" SERVOS
Product number: 9707490
Manufacturer number: 9200

€44.99*

Not in stock. Available only by special order in approx. 7 to 21 business days.

Privacy

PowerBus to PWM Adapter . Converts the bus signal into conventional servo signals. With fuse protection for all outputs.

Features:
- Operating voltage 4.0V - 9.0V
- Power supply 2S LiPo, 2S LiFePo, 5S NiCd/NiMH
- Current carrying capacity 20A
- Signal Input PowerBus
- Channels 18
- Servo outputs, total 4
- Servo pulse resolution 0.5µs
- Dimensions 59 x 33 x 9 mm
- Temperature range -30°C to +75°C

The PowerBus enables a completely new structure of servo cabling. The PowerBus consists of a three-wire cable that supplies connected servos with power and signal. At first glance, this is nothing unusual, but the big difference lies in the signal line: with conventional servo signals, only the information for a single servo can be transmitted - by means of a PWM modulated signal, also called pulse width modulation. With a servo bus system, the information for several servos is transmitted on a digital basis. The information for the individual servos is addressed. Because each individual servo is in turn assigned an address, the servo - provided it has a decoder - can read its information from the data stream and convert it into a movement at the rudder.

Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

PowerBox-Systems GmbH
Ludwig-Auer-Straße 5
86609 DONAUWÖRTH
DEUTSCHLAND
Tel: 0049/906/99999-200
[email protected]