A full 10 Hz telemetry GPS with micro SD memory card, TEK Vario, and acceleration sensor!
The new version 3 replaces the GPS-Logger 2 and remains fully compatible.
The new hardware offers:
a new GPS module for better GPS reception even under difficult conditions
further improved pressure sensors for even finer vario resolution with less noise
a horizontally aligned TEK connection for easier installation straight in narrow hulls
The GPS-Logger 3 is a fully-fledged GPS system, which was developed especially for the needs of model building.
It is extremely small and lightweight, but has excellent features and capabilities.
With a recording rate of up to 10 Hz and the micro-SD memory card, almost any length of recording with high detail resolution is possible.
Telemetry over 2.4 GHz systems with return channel is a fixed component of the GPS-Logger 3 and fully integrated.
According to our philosophy to support as many systems as possible, the GPS-Logger 3 also speaks of telemetry:
Jeti Duplex
multiplex M-Link
Graupner HoTT
"Futaba
JR DMSS
FrSky?
spectrum (via spectrum adapter)
The telemetry used must only be specified once in the GPS logger 3 settings. This is done either via our PC program "GPS converter" or with the UniDisplay. HoTT is selected on delivery.
The GPS-Logger 3 realizes a high-quality Vario with a built-in high-resolution pressure sensor via telemetry and also enables the use of compensation nozzles with the integrated TEK connection. This results in a Vario function, which indicates very accurately real ascent and descent, independent of the "stick thermals".
A second pressure sensor is installed for exact height measurement even when operating with a TEK nozzle, which provides correct height data regardless of the speed.
The built-in 3-axis acceleration sensor provides information about the loads in flight. The acceleration of all three axes can be displayed here at each waypoint in the recording and also via telemetry.
The new competition format OLC, the Online Contest, is also optimally supported by GPS-Logger 3. The built-in noise sensor (ENL = engine noise level) provides data that automatically identifies the engine running times during climb. The IGC file required for the OLC is created directly on the memory card and digitally signed; no conversion software is required.
GPS-Logger 3 can also be used for another competition format, Soaringleague.
Soraingleague.net is a new website for easy online evaluation of gliding flights with any model. It couldn't be simpler!
When operating with Multiplex M-Link, all data on the sensor bus are automatically logged by the GPS-Logger 3 and also written to the memory card > MSB data logger.
In addition to the own measured values, the GPS-Logger 3 can also read out the complete data of our UniLog 1 + 2 and UniSens-E live via a direct connection cable and write it to the memory card.
Via our UniDisplay all measured values of the GPS-Logger 3 can be directly viewed live. All settings and alarms can of course also be conveniently programmed via display.
The representation and evaluation of the data takes place 3D in Google EarthTM. For the conversion into the Google EarthTM format only our free software "SM GPS Converter" and the also free Google EarthTM in the standard version is necessary.
Our GPS-Logger 3 is also supported by the well-known software LogView. Here the GPS data can also be converted into the Google EarthTM format. In addition, the values can also be displayed in normal waveform / tabular form and much more.
GNU DataExplorer is based on Java and is therefore also suitable for Mac or Linux in addition to Windows.
No matter if glider, aerobatic, helicopter, HLG or slowflyer, the GPS-Logger 3 can be used due to its low weight and compact size in almost any area. Of course the GPS-Logger 3 is not only suitable for model flying. It can also be installed in RC boats, RC cars etc..
And the GPS-Logger 3 can do that:
10 Hz GPS, i.e. 10 measured values per second
particularly good resolution of the data
micro SD Memory Card
almost unlimited recording and easy reading of data
Data is stored as plain text on the memory card.
Further processing with many programs possible
high-resolution Vario with TEK connection
Height measurement with second pressure sensor with automatic zero setting after switch-on
integrated 3 axis acceleration sensor up to +- 16 g
direct creation of the IGC file for the Online Contest (OLC) with integrated motor noise sensor for the ENL measurement
full telemetry support for Jeti Duple
The new version 3 replaces the GPS-Logger 2 and remains fully compatible.
The new hardware offers:
a new GPS module for better GPS reception even under difficult conditions
further improved pressure sensors for even finer vario resolution with less noise
a horizontally aligned TEK connection for easier installation straight in narrow hulls
The GPS-Logger 3 is a fully-fledged GPS system, which was developed especially for the needs of model building.
It is extremely small and lightweight, but has excellent features and capabilities.
With a recording rate of up to 10 Hz and the micro-SD memory card, almost any length of recording with high detail resolution is possible.
Telemetry over 2.4 GHz systems with return channel is a fixed component of the GPS-Logger 3 and fully integrated.
According to our philosophy to support as many systems as possible, the GPS-Logger 3 also speaks of telemetry:
Jeti Duplex
multiplex M-Link
Graupner HoTT
"Futaba
JR DMSS
FrSky?
spectrum (via spectrum adapter)
The telemetry used must only be specified once in the GPS logger 3 settings. This is done either via our PC program "GPS converter" or with the UniDisplay. HoTT is selected on delivery.
The GPS-Logger 3 realizes a high-quality Vario with a built-in high-resolution pressure sensor via telemetry and also enables the use of compensation nozzles with the integrated TEK connection. This results in a Vario function, which indicates very accurately real ascent and descent, independent of the "stick thermals".
A second pressure sensor is installed for exact height measurement even when operating with a TEK nozzle, which provides correct height data regardless of the speed.
The built-in 3-axis acceleration sensor provides information about the loads in flight. The acceleration of all three axes can be displayed here at each waypoint in the recording and also via telemetry.
The new competition format OLC, the Online Contest, is also optimally supported by GPS-Logger 3. The built-in noise sensor (ENL = engine noise level) provides data that automatically identifies the engine running times during climb. The IGC file required for the OLC is created directly on the memory card and digitally signed; no conversion software is required.
GPS-Logger 3 can also be used for another competition format, Soaringleague.
Soraingleague.net is a new website for easy online evaluation of gliding flights with any model. It couldn't be simpler!
When operating with Multiplex M-Link, all data on the sensor bus are automatically logged by the GPS-Logger 3 and also written to the memory card > MSB data logger.
In addition to the own measured values, the GPS-Logger 3 can also read out the complete data of our UniLog 1 + 2 and UniSens-E live via a direct connection cable and write it to the memory card.
Via our UniDisplay all measured values of the GPS-Logger 3 can be directly viewed live. All settings and alarms can of course also be conveniently programmed via display.
The representation and evaluation of the data takes place 3D in Google EarthTM. For the conversion into the Google EarthTM format only our free software "SM GPS Converter" and the also free Google EarthTM in the standard version is necessary.
Our GPS-Logger 3 is also supported by the well-known software LogView. Here the GPS data can also be converted into the Google EarthTM format. In addition, the values can also be displayed in normal waveform / tabular form and much more.
GNU DataExplorer is based on Java and is therefore also suitable for Mac or Linux in addition to Windows.
No matter if glider, aerobatic, helicopter, HLG or slowflyer, the GPS-Logger 3 can be used due to its low weight and compact size in almost any area. Of course the GPS-Logger 3 is not only suitable for model flying. It can also be installed in RC boats, RC cars etc..
And the GPS-Logger 3 can do that:
10 Hz GPS, i.e. 10 measured values per second
particularly good resolution of the data
micro SD Memory Card
almost unlimited recording and easy reading of data
Data is stored as plain text on the memory card.
Further processing with many programs possible
high-resolution Vario with TEK connection
Height measurement with second pressure sensor with automatic zero setting after switch-on
integrated 3 axis acceleration sensor up to +- 16 g
direct creation of the IGC file for the Online Contest (OLC) with integrated motor noise sensor for the ENL measurement
full telemetry support for Jeti Duple
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
SM-Modellbau
Blumenstraße 24
82407 Wielenbach
DEUTSCHLAND
Tel: +49/881/9270050
SM-Modellbau GPS LOGGER 3 TELEMETRY DATA LOGGER
Product number:
9763252
Manufacturer number:
2750
€129.00*
Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
Additionally selected items:
A full 10 Hz telemetry GPS with micro SD memory card, TEK Vario, and acceleration sensor!
The new version 3 replaces the GPS-Logger 2 and remains fully compatible.
The new hardware offers:
a new GPS module for better GPS reception even under difficult conditions
further improved pressure sensors for even finer vario resolution with less noise
a horizontally aligned TEK connection for easier installation straight in narrow hulls
The GPS-Logger 3 is a fully-fledged GPS system, which was developed especially for the needs of model building.
It is extremely small and lightweight, but has excellent features and capabilities.
With a recording rate of up to 10 Hz and the micro-SD memory card, almost any length of recording with high detail resolution is possible.
Telemetry over 2.4 GHz systems with return channel is a fixed component of the GPS-Logger 3 and fully integrated.
According to our philosophy to support as many systems as possible, the GPS-Logger 3 also speaks of telemetry:
Jeti Duplex
multiplex M-Link
Graupner HoTT
"Futaba
JR DMSS
FrSky?
spectrum (via spectrum adapter)
The telemetry used must only be specified once in the GPS logger 3 settings. This is done either via our PC program "GPS converter" or with the UniDisplay. HoTT is selected on delivery.
The GPS-Logger 3 realizes a high-quality Vario with a built-in high-resolution pressure sensor via telemetry and also enables the use of compensation nozzles with the integrated TEK connection. This results in a Vario function, which indicates very accurately real ascent and descent, independent of the "stick thermals".
A second pressure sensor is installed for exact height measurement even when operating with a TEK nozzle, which provides correct height data regardless of the speed.
The built-in 3-axis acceleration sensor provides information about the loads in flight. The acceleration of all three axes can be displayed here at each waypoint in the recording and also via telemetry.
The new competition format OLC, the Online Contest, is also optimally supported by GPS-Logger 3. The built-in noise sensor (ENL = engine noise level) provides data that automatically identifies the engine running times during climb. The IGC file required for the OLC is created directly on the memory card and digitally signed; no conversion software is required.
GPS-Logger 3 can also be used for another competition format, Soaringleague.
Soraingleague.net is a new website for easy online evaluation of gliding flights with any model. It couldn't be simpler!
When operating with Multiplex M-Link, all data on the sensor bus are automatically logged by the GPS-Logger 3 and also written to the memory card > MSB data logger.
In addition to the own measured values, the GPS-Logger 3 can also read out the complete data of our UniLog 1 + 2 and UniSens-E live via a direct connection cable and write it to the memory card.
Via our UniDisplay all measured values of the GPS-Logger 3 can be directly viewed live. All settings and alarms can of course also be conveniently programmed via display.
The representation and evaluation of the data takes place 3D in Google EarthTM. For the conversion into the Google EarthTM format only our free software "SM GPS Converter" and the also free Google EarthTM in the standard version is necessary.
Our GPS-Logger 3 is also supported by the well-known software LogView. Here the GPS data can also be converted into the Google EarthTM format. In addition, the values can also be displayed in normal waveform / tabular form and much more.
GNU DataExplorer is based on Java and is therefore also suitable for Mac or Linux in addition to Windows.
No matter if glider, aerobatic, helicopter, HLG or slowflyer, the GPS-Logger 3 can be used due to its low weight and compact size in almost any area. Of course the GPS-Logger 3 is not only suitable for model flying. It can also be installed in RC boats, RC cars etc..
And the GPS-Logger 3 can do that:
10 Hz GPS, i.e. 10 measured values per second
particularly good resolution of the data
micro SD Memory Card
almost unlimited recording and easy reading of data
Data is stored as plain text on the memory card.
Further processing with many programs possible
high-resolution Vario with TEK connection
Height measurement with second pressure sensor with automatic zero setting after switch-on
integrated 3 axis acceleration sensor up to +- 16 g
direct creation of the IGC file for the Online Contest (OLC) with integrated motor noise sensor for the ENL measurement
full telemetry support for Jeti Duple
The new version 3 replaces the GPS-Logger 2 and remains fully compatible.
The new hardware offers:
a new GPS module for better GPS reception even under difficult conditions
further improved pressure sensors for even finer vario resolution with less noise
a horizontally aligned TEK connection for easier installation straight in narrow hulls
The GPS-Logger 3 is a fully-fledged GPS system, which was developed especially for the needs of model building.
It is extremely small and lightweight, but has excellent features and capabilities.
With a recording rate of up to 10 Hz and the micro-SD memory card, almost any length of recording with high detail resolution is possible.
Telemetry over 2.4 GHz systems with return channel is a fixed component of the GPS-Logger 3 and fully integrated.
According to our philosophy to support as many systems as possible, the GPS-Logger 3 also speaks of telemetry:
Jeti Duplex
multiplex M-Link
Graupner HoTT
"Futaba
JR DMSS
FrSky?
spectrum (via spectrum adapter)
The telemetry used must only be specified once in the GPS logger 3 settings. This is done either via our PC program "GPS converter" or with the UniDisplay. HoTT is selected on delivery.
The GPS-Logger 3 realizes a high-quality Vario with a built-in high-resolution pressure sensor via telemetry and also enables the use of compensation nozzles with the integrated TEK connection. This results in a Vario function, which indicates very accurately real ascent and descent, independent of the "stick thermals".
A second pressure sensor is installed for exact height measurement even when operating with a TEK nozzle, which provides correct height data regardless of the speed.
The built-in 3-axis acceleration sensor provides information about the loads in flight. The acceleration of all three axes can be displayed here at each waypoint in the recording and also via telemetry.
The new competition format OLC, the Online Contest, is also optimally supported by GPS-Logger 3. The built-in noise sensor (ENL = engine noise level) provides data that automatically identifies the engine running times during climb. The IGC file required for the OLC is created directly on the memory card and digitally signed; no conversion software is required.
GPS-Logger 3 can also be used for another competition format, Soaringleague.
Soraingleague.net is a new website for easy online evaluation of gliding flights with any model. It couldn't be simpler!
When operating with Multiplex M-Link, all data on the sensor bus are automatically logged by the GPS-Logger 3 and also written to the memory card > MSB data logger.
In addition to the own measured values, the GPS-Logger 3 can also read out the complete data of our UniLog 1 + 2 and UniSens-E live via a direct connection cable and write it to the memory card.
Via our UniDisplay all measured values of the GPS-Logger 3 can be directly viewed live. All settings and alarms can of course also be conveniently programmed via display.
The representation and evaluation of the data takes place 3D in Google EarthTM. For the conversion into the Google EarthTM format only our free software "SM GPS Converter" and the also free Google EarthTM in the standard version is necessary.
Our GPS-Logger 3 is also supported by the well-known software LogView. Here the GPS data can also be converted into the Google EarthTM format. In addition, the values can also be displayed in normal waveform / tabular form and much more.
GNU DataExplorer is based on Java and is therefore also suitable for Mac or Linux in addition to Windows.
No matter if glider, aerobatic, helicopter, HLG or slowflyer, the GPS-Logger 3 can be used due to its low weight and compact size in almost any area. Of course the GPS-Logger 3 is not only suitable for model flying. It can also be installed in RC boats, RC cars etc..
And the GPS-Logger 3 can do that:
10 Hz GPS, i.e. 10 measured values per second
particularly good resolution of the data
micro SD Memory Card
almost unlimited recording and easy reading of data
Data is stored as plain text on the memory card.
Further processing with many programs possible
high-resolution Vario with TEK connection
Height measurement with second pressure sensor with automatic zero setting after switch-on
integrated 3 axis acceleration sensor up to +- 16 g
direct creation of the IGC file for the Online Contest (OLC) with integrated motor noise sensor for the ENL measurement
full telemetry support for Jeti Duple
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
SM-Modellbau
Blumenstraße 24
82407 Wielenbach
DEUTSCHLAND
Tel: +49/881/9270050