-5%
MULTIPLEX SMART SX TRANSMITTER MODE 2 AND 4 2,4Ghz Remote Control M-LINK
Product number:
95503
Manufacturer number:
15301
€104.99*
% €109.99* (4.55% saved)Not in stock. Available only by special order in approx. 7 to 21 business days.
- Smart SX 2.4 Ghz transmitter
- Receiver RX-5 M-LINK ID 1
- 3 x AA batteries
- Receiver RX-5 M-LINK ID 1
- 3 x AA batteries
| Channels: | 5 |
|---|
The SMART SX M-LINK from MULTIPLEX is a compact and intelligent 6-channel entry-level remote control. The transmitter recognizes the respective model through the M-LINK ID receivers and activates the corresponding setting from its considerable model memory (50). With the proven 2.4 GHz M-LINK transmission system, the full range is certainly available.
Of course, the SMART SX can also be operated with any M-LINK receiver. All compatible MULTIPLEX ELAPOR® models from RR+ to RTF are factory programmed. Due to the easy operation of the transmitter, almost every other model, from the most different manufacturers, can be adjusted very easily. Even the last fine trim of a model is stored.
Properties:
Caution! To activate the gas channel, press into the gas channel lever, a safety function is required!
Since their founding in 1958, Multiplex has developed top RC Radio Systems for the RC Industry! With the current 2,4 GHz Technology M-LINK and telemetry system, Multiplex has put itself in front of the RC Industry in Germany. Since the early 2000s Multiplex began producing finished models made from Elapor, a high-tech particle foam, which setted a milestone im the RC Airplane, as well as in the Helicopter (Funcopter) sectors. Since 2002, Multiplex has been owned by the south korean HiTEC group and has become one of the leading RC manufacturers in the world!
Of course, the SMART SX can also be operated with any M-LINK receiver. All compatible MULTIPLEX ELAPOR® models from RR+ to RTF are factory programmed. Due to the easy operation of the transmitter, almost every other model, from the most different manufacturers, can be adjusted very easily. Even the last fine trim of a model is stored.
Properties:
- Intelligent, patented model recognition
IOAT: new, patented antenna technology: for a significant increase in the safety standard: transmission range far above the visual limit, optimized transmission direction (no radio waves to the rear, see page 19); antenna integrated in the housing - Implementation of almost all RC models on the market is possible
unbelievably many models can be operated simultaneously without problems
There are 5 fully proportional channels available: Height, side, motor, plus two crossbars and an additional switch channel on the power trim switch.
Long operating time up to 25 h
Caution! To activate the gas channel, press into the gas channel lever, a safety function is required!
Since their founding in 1958, Multiplex has developed top RC Radio Systems for the RC Industry! With the current 2,4 GHz Technology M-LINK and telemetry system, Multiplex has put itself in front of the RC Industry in Germany. Since the early 2000s Multiplex began producing finished models made from Elapor, a high-tech particle foam, which setted a milestone im the RC Airplane, as well as in the Helicopter (Funcopter) sectors. Since 2002, Multiplex has been owned by the south korean HiTEC group and has become one of the leading RC manufacturers in the world!
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Multiplex
Modellsport GmbH & Co.KG
Westliche Gewerbestr. 1
75015 Bretten-Gölshausen
DEUTSCHLAND
Tel: +49/7252/58093 0
[email protected]