RadioLink Transmitter, Receiver and Accessories
Multifunction stands for a wide range of applications in RC flight, truck, crawler, construction equipment, helicopter, drone and ship modeling.
Easy for beginners and challenging enough for experts...
AT10II is a 12-channel PC transmitter for hobby and sport modelers for comfortable control of all currently common models: Acro-motor models, gliders, helicopters, multicopters, cars and other land vehicles and ships. The 2.4Ghz remote control has a practical housing that fits very well in the hand and which has years of proven ergonomic layout of the controls.
Multiple functionalities for each model class. Five programmed flight characteristics for each model.
Fully customizable switches (8), knobs (3) and sliders (2) to meet specific requirements.
The transmitter automatically changes the layout depending on the selected mode.
The AT10II uses the unique Radiolink technology with simultaneous DSSS and FHSS frequency hopping transmission, which ensures long range, reliability and excellent noise immunity. The system allows telemetry data to be transmitted from the receiver and displayed on the transmitter's display.
Features der AT10 - 2
- Setting servo reverse switches
- Setting of end points of deflections
- Subtrim
- Trim step size
- Dual rate deflections
- Setting of servo speeds
- Exponential progression of deflections
- Motor off
- Safe freewheel
- Failsafe
- Gyro remote control for helicopters and airplanes
- Three timer
- Teacher-student
- Servo monitor
- Flaperon
- Elevon
- V-tail
- 8 freely programmable mixers (4 linear, 4 s 5-point curve)
- Airbrakes
- Control of the glider flaps
- Mix aileron
- Mix elevator flaps
- Mix flap aileron
- Elevator with 2 servos
- Flap trim
- Delta mixer
- Snap Rolls
- Throttle Curve (for powered aircraft)
- Throttle delay
- Throttle Curve (7-point for helicopters)
- Tail rotor curve (7-point for helicopters)
- Revo-Mix
- Swashplate mixer (8 types)
- Throttle mixer (for helicopters)
- Swashplate deflection limiter
- Trim and throttle collective when hovering
- Trim of high and low collective
- Autorotation
- Governor control
- Flight modes (up to 5 modes for gliders and helicopters)
- Flight modes for multicopters and drones
- Micro USB jack is used to update firmware with a PC.
Ergonomic design
AT10II is designed for both experts and beginners.
Switches in different lengths make the AT10II easy to recognize and use.
Long gimbal sticks increase the precision of movements. Mode 1 or 2 can be specified when ordering. The user can change the transmitter mode via a software setting (see user manual for more details).
A spring holder for the throttle* is included in the scope of delivery. The user can adjust the throttle to his specific needs.
The user-friendly design and ease of use make the AT10II an excellent transmitter for recreational, sport, competition or 3D flying.
*Throttle Stick Spring Retainer: The Throttle Stick Spring Retainer allows the throttle stick to automatically return to the neutral (center) position.
Longer battery life...
Thanks to the switching power supply (SMPS), the current consumption of the AT10II is only 105 mA (or less), consuming 50% less power than similar products.
The transmitter can operate for twelve hours with an 1800 mAh LiPo battery.
Thanks to the universal JST connector, the AT10II can be easily adapted to different battery layouts: 8pcs AA batteries, LiPo battery (2S-4S), 18650 Lithium, Li-Ion, NiMH or NiCad battery.
CAUTION: When using 18650 lithium battery for AT10II, make sure the 18650 lithium battery has JST connector and the battery case dimensions are 115*32*30.5mm (L*W*H=4.53"*1.26"*1.2").
Broadcasting system:
AT10II uses unique Radiolink technology with simultaneous DSS and FHSS frequency hopping for long range, reliability and excellent noise immunity. The system enables transmission of telemetry data from the receiver and its display on the transmitter display.
Operating elements:
The main functions are controlled by precise cross sticks with adjustable force by means of neutralization springs. It is possible to convert the axis for throttle to the right or left. This allows you to select stick modes 1-4. The control sticks are adjustable in position. You can also buy long aluminum heads (with M3 thread). The digital trims have an audible signal of the step sequence and a graphic indication of the positions on the display. They are slightly off-center and easy to reach. Additional proportional functions can be controlled by two buttons on the sides of the transmitter with mechanically locked center position and three buttons in the center above the main switch. 8 switches (including three three-way switches and one momentary two-way switch) can serve as channel switches, for switching flight modes, or for turning mixers on and off. The controls are freely assignable.
Telemetry:
When using a telemetry receiver (R12DS, R9DS), the transmitter display shows the receiver voltage and signal strength (with adjustable alarm threshold). After connecting the PRM-01 telemetry module, the voltage of the drive battery (1-6S LiPo) is also measured and displayed.
Compatible receivers:
Telemetry, full range: R9DS, R12DS
Non-telemetric, full range: R12DSM Mini
Non-telemetric, limited range: R6DS, R6DSM Mini
The program menu...
...is always divided into two parts for clarity - the BASIC basic menu contains the basic system settings of the transmitter, basic model settings (model type, assignment of controls and switches, sizes and senses of deviations, subtrim trim, double deviations u exponentials etc.). The extended ADVANCE menu contains freely programmable mixes, special mixes for a specific model type (throttle and collective curves, butterfly mix, mix for butterfly tail surfaces, etc.).
Preprogrammed model types
- Glider (1 aileron + 1 flap)
- Glider (2 wings + 1 flap)
- Glider (2 ailerons + 2 flaps)
- Motor plane for aerobatics
- Helicopter
- Multicopter
- Cars
- Ships
Contents of the remote control
Transmitter AT10II
12-channel telemetry receiver R12DS
Telemetry module for voltage measurement PRM-01 with cable
Instruction manual, stickers and small parts