Capacity (mAh): | 5800 |
---|---|
Voltage (V): | 7,6 |
Weight (g): | 220 |
Length (mm): | 96 |
Type: | LiPo |
Form: | 2S |
Wide (mm): | 46 |
Discharge current (C): | 140 |
Height (mm): | 25 |
Connection: | XT-60 |
Balancer plug: | XH |
Please also read our safety notice: https://www.lindinger.at/en/navigation/37ea30801f564076831f044e67e1fa6f
Graphene LiPo information:
ABSIMA Graphene Lipo series can be used as a standard 7.4V LiPo battery or as a high voltage (HV) 7.6V LiPo. But what is the difference between "7.4 V STANDARD" AND "7.6 V HIGH VOLTAGE" capacities?
Normal LiPo batteries have a final charge voltage of 4.2V per cell when fully charged. Due to the unique hybrid RS cell structure, the new type can handle a bit more and can be charged up to 4.35V. This not only results in more power from startup, but also means that there is more power in each individual cell, allowing for longer runtimes.
How do I charge HV LiPo batteries?
First, check if your charger includes a program for charging HV LiPos. It must be possible to set a charging end voltage of 4.35 volts. If this is the case, HV LiPo batteries should be charged as normal LiPo batteries. The maximum charge rate for an ABSIMA Graphene Lipo is 5C (5 times the capacity of the battery).
One more very important note about the charging process!
Please be sure to reset the final charge voltage back to 4.2V after completing the HV battery charge. Never charge a standard LiPo battery (7.4V) with 4.35V final voltage!!!!
Good to know:
A LiPo battery of the new generation should not be stored fully charged. Rather, the battery should be charged between 50% and 60% and not be stored below 10% discharged, otherwise the cells will be damaged.
HV-Lipos can also be charged with up to 4.2V like normal Lipos. They still offer more runtime under full load due to the much more compact design and a lower voltage drop.
Features:
- Capacity: 5800 mAh
- C-Rate: 140C
- Voltage: 7.6V
- Wh: 44,08
- Plugs: 5mm Bullet / T-Plug (cable included)
- Maximum charging current: 5C
- Type of construction: Hardcase Shorty
- Dimensoins (LxWxH): 96x46x25 mm (±1mm)
- Balancer plug system: XH
- Weight: 220g (±10g)
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!
ABSIMA GmbH
Gibitzenhofstraße 127A
90443 NÜRNBERG
DEUTSCHLAND
Tel: +49/911 650841 34
[email protected]
€49.99*
% €59.95* (16.61% saved)Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
Capacity (mAh): | 5800 |
---|---|
Voltage (V): | 7,6 |
Weight (g): | 220 |
Length (mm): | 96 |
Type: | LiPo |
Form: | 2S |
Wide (mm): | 46 |
Discharge current (C): | 140 |
Height (mm): | 25 |
Connection: | XT-60 |
Balancer plug: | XH |
Graphene LiPo information:
ABSIMA Graphene Lipo series can be used as a standard 7.4V LiPo battery or as a high voltage (HV) 7.6V LiPo. But what is the difference between "7.4 V STANDARD" AND "7.6 V HIGH VOLTAGE" capacities?
Normal LiPo batteries have a final charge voltage of 4.2V per cell when fully charged. Due to the unique hybrid RS cell structure, the new type can handle a bit more and can be charged up to 4.35V. This not only results in more power from startup, but also means that there is more power in each individual cell, allowing for longer runtimes.
How do I charge HV LiPo batteries?
First, check if your charger includes a program for charging HV LiPos. It must be possible to set a charging end voltage of 4.35 volts. If this is the case, HV LiPo batteries should be charged as normal LiPo batteries. The maximum charge rate for an ABSIMA Graphene Lipo is 5C (5 times the capacity of the battery).
One more very important note about the charging process!
Please be sure to reset the final charge voltage back to 4.2V after completing the HV battery charge. Never charge a standard LiPo battery (7.4V) with 4.35V final voltage!!!!
Good to know:
A LiPo battery of the new generation should not be stored fully charged. Rather, the battery should be charged between 50% and 60% and not be stored below 10% discharged, otherwise the cells will be damaged.
HV-Lipos can also be charged with up to 4.2V like normal Lipos. They still offer more runtime under full load due to the much more compact design and a lower voltage drop.
Features:
- Capacity: 5800 mAh
- C-Rate: 140C
- Voltage: 7.6V
- Wh: 44,08
- Plugs: 5mm Bullet / T-Plug (cable included)
- Maximum charging current: 5C
- Type of construction: Hardcase Shorty
- Dimensoins (LxWxH): 96x46x25 mm (±1mm)
- Balancer plug system: XH
- Weight: 220g (±10g)
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!
ABSIMA GmbH
Gibitzenhofstraße 127A
90443 NÜRNBERG
DEUTSCHLAND
Tel: +49/911 650841 34
[email protected]