Skip to main content

FREE SHIPPING from € 100,- / DE / AT

FREE SHIPPING: DE, AT... from 100,- € / CH ... from 199,- / FR, BE, BG, FR, IT, HR, NL ... from 299,- €

FREE SHIPPING from € 100,- / DE / AT

product description
The LiPo heating case Pro has a two-line display and gives the user the possibility to change or display a variety of functions, values and parameters.

Displays of ...
  • SET and ACTUAL Temperature
  • Current voltage
  • The following can be changed in the menu ...
  • Target temperature
  • hysteresis
  • heating time
  • heating pause
  • Sound on/off
  • Brightness of the display
  • The base plate inside the case is a light grey powder-coated aluminium plate which is not electrically conductive and predominantly scratch-resistant. In addition, the edge insulation has been optimally bonded.


Technical data
Input voltage 12-28 Volt DC stabilized
Power 90 Watt
Temperature adjustable from 20 to 50°C
Case size L
Outer dimensions 415 x 350 x 190 mm
Internal dimensions 355 x 255 x 80 mm
weight 3,2 kg
Safety Reverse polarity protection
thermal fuse
EU Declaration of Conformity CE

safety instructions
This is not a Lipo safety case!

Operation on alternating voltage leads to the destruction of the heater and the battery inside. This voids any warranty of the manufacturer.

  • The operation of the heater is only permitted under supervision outdoors on a non-combustible surface.
  • The heater is maintenance-free. It will be destroyed when opened by the user.
  • If the heater is opened, the manufacturer assumes no liability.
  • Defective batteries must not be heated in the heater, as the cells of lipo batteries in particular can explode and burn.
  • This heater is only suitable for use in model making.
  • It is only approved for use with 12 to 28V stabilized DC voltage.
  • Operation is only permitted when closed.
  • Only high-quality power supply units with sieved (smoothed) output voltage or 12V batteries are to be used.
  • The power source must be equipped with appropriate overload protection.


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

ETLZ Elektro Technische
Lösungen Zeiler
Greifswalder Straße 2a
17498 MESEKENHAGEN
DEUTSCHLAND
Tel: +49/15150742419

ETLZ LIPO HEATING CASE PROFESSIONAL L
Product number: 9761574
Manufacturer number: PROFESSIONAL-L

€326.99*

Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.

product description
The LiPo heating case Pro has a two-line display and gives the user the possibility to change or display a variety of functions, values and parameters.

Displays of ...
  • SET and ACTUAL Temperature
  • Current voltage
  • The following can be changed in the menu ...
  • Target temperature
  • hysteresis
  • heating time
  • heating pause
  • Sound on/off
  • Brightness of the display
  • The base plate inside the case is a light grey powder-coated aluminium plate which is not electrically conductive and predominantly scratch-resistant. In addition, the edge insulation has been optimally bonded.


Technical data
Input voltage 12-28 Volt DC stabilized
Power 90 Watt
Temperature adjustable from 20 to 50°C
Case size L
Outer dimensions 415 x 350 x 190 mm
Internal dimensions 355 x 255 x 80 mm
weight 3,2 kg
Safety Reverse polarity protection
thermal fuse
EU Declaration of Conformity CE

safety instructions
This is not a Lipo safety case!

Operation on alternating voltage leads to the destruction of the heater and the battery inside. This voids any warranty of the manufacturer.

  • The operation of the heater is only permitted under supervision outdoors on a non-combustible surface.
  • The heater is maintenance-free. It will be destroyed when opened by the user.
  • If the heater is opened, the manufacturer assumes no liability.
  • Defective batteries must not be heated in the heater, as the cells of lipo batteries in particular can explode and burn.
  • This heater is only suitable for use in model making.
  • It is only approved for use with 12 to 28V stabilized DC voltage.
  • Operation is only permitted when closed.
  • Only high-quality power supply units with sieved (smoothed) output voltage or 12V batteries are to be used.
  • The power source must be equipped with appropriate overload protection.


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

ETLZ Elektro Technische
Lösungen Zeiler
Greifswalder Straße 2a
17498 MESEKENHAGEN
DEUTSCHLAND
Tel: +49/15150742419