HACKER TopFuel LiPo 20C ECO-X 1450mAh 2S 7,4V Slim MTAG
Product number:
9786881
Manufacturer number:
91450226
Robbe Modellsport RO-SAFETY XL LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY
€134.99*
€139.99*(3.57% saved)
| Capacity (mAh): | 1450 |
|---|---|
| Voltage (V): | 7,4 |
| Weight (g): | 70,5 |
| Length (mm): | 125 |
| Form: | 2S |
| Wide (mm): | 50/14/- |
| Discharge current (C): | 20 |
| Height (mm): | 20 |
| Connection: | JR |
| Balancer plug: | XH |
High quality and durable LiPo battery. Due to the slim design perfectly suitable e. g. for narrow fuselages.
Perfectly suitable for the receiver current supply inside R/C models when weight and size matters.
Battery connection
Internal chip for battery telemetry
Battery data such as type, number of cells, capacity, C-rate or battery ID are stored on the passive MTAG chip. If desired* these values can be read out with an external NFC sensor such as the HACKER or JETI MTAG and be transferred to the transmitter telemetry system.
The built-in MTAG chip also offers the possibility of manually or automatically counting and storing the charging cycles. By using several identical batteries in serial or parallel operation, so more effective active battery management is possible.
*Note: It is up to the user if he wants to use the MTAG function or not. The TopFuel battery can be used without MTAG function like any ordinary battery.
Specifications
Dimensions and Weight
Perfectly suitable for the receiver current supply inside R/C models when weight and size matters.
Battery connection
- JR connection
- XH balancer connector
Internal chip for battery telemetry
Battery data such as type, number of cells, capacity, C-rate or battery ID are stored on the passive MTAG chip. If desired* these values can be read out with an external NFC sensor such as the HACKER or JETI MTAG and be transferred to the transmitter telemetry system.
The built-in MTAG chip also offers the possibility of manually or automatically counting and storing the charging cycles. By using several identical batteries in serial or parallel operation, so more effective active battery management is possible.
*Note: It is up to the user if he wants to use the MTAG function or not. The TopFuel battery can be used without MTAG function like any ordinary battery.
Specifications
- Battery typeLiPo
- Ausführung2S
- Cells2S
- Nominal voltage [V]7,4V
- Capacity [mAh]1450
- C rate20C
- Balancer connectorXH
Dimensions and Weight
- Length [mm]125
- Width [mm]14
- Height [mm]20
- Weight [g]70,5
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]