HACKER
HACKER TopFuel LiPo 35C Power-X 2400-3S MTAG 11,1V XT-60
Product number:
9777674
Manufacturer number:
92400361
Robbe Modellsport RO-SAFETY XL LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY
€134.99*
€139.99*(3.57% saved)
| Capacity (mAh): | 2400 |
|---|---|
| Voltage (V): | 11,1 |
| Weight (g): | 201 |
| Length (mm): | 108 |
| Type: | LiPo |
| Form: | 3S |
| Wide (mm): | 34 |
| Discharge current (C): | 35(70) |
| Height (mm): | 26 |
| Connection: | XT-60 |
| Balancer plug: | XH |
The Power-X cells are the power packs from our battery range. They offer the highest voltage level and this constantly even at a continuous load of 35C over the entire battery capacity.
The battery is completely soldered with the XT60 connector system and is the first choice when maximum power over a longer period of time is required.
This robust cell is perfect for impeller, tow and racing models.
Connectors
Internal chip for battery telemetry
The passive MTAG chip stores battery data such as type, cell count, capacity, C-rate or battery ID. If required*, these values can be read out with an external NFC sensor such as the HACKER or JETI MTAG and transferred to the transmitter telemetry.
The built-in MTAG chip also offers the possibility to count and store the charging cycles manually or automatically. When using several identical batteries in serial or parallel operation, a more effective active battery management becomes possible.
*Note: It is up to the user whether he wants to use the MTAG function or not. Without MTAG, the TopFuel battery can be used like any ordinary battery.
Voltage Indicator Technology
The TopFuel battery is supplied with the proven Voltage Indicator technology. At the touch of a button, the battery charge status is displayed by four differently coloured LEDs. The Voltage Indicator helps to correctly assess the battery charge status at all times.
The battery is completely soldered with the XT60 connector system and is the first choice when maximum power over a longer period of time is required.
This robust cell is perfect for impeller, tow and racing models.
Connectors
- XT60 connection with gold contacts, suitable for continuous loads up to 60 amps
- XH Balancer connection
Internal chip for battery telemetry
The passive MTAG chip stores battery data such as type, cell count, capacity, C-rate or battery ID. If required*, these values can be read out with an external NFC sensor such as the HACKER or JETI MTAG and transferred to the transmitter telemetry.
The built-in MTAG chip also offers the possibility to count and store the charging cycles manually or automatically. When using several identical batteries in serial or parallel operation, a more effective active battery management becomes possible.
*Note: It is up to the user whether he wants to use the MTAG function or not. Without MTAG, the TopFuel battery can be used like any ordinary battery.
Voltage Indicator Technology
The TopFuel battery is supplied with the proven Voltage Indicator technology. At the touch of a button, the battery charge status is displayed by four differently coloured LEDs. The Voltage Indicator helps to correctly assess the battery charge status at all times.