-40%
Multiplex
MULTIPLEX ROXXY EVO LIPO 3 -350B 30C WITH BID CHIP
Product number:
9774902
Manufacturer number:
1-00017
Robbe Modellsport RO-SAFETY XL LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY
€134.99*
€139.99*(3.57% saved)
| Capacity (mAh): | 350 |
|---|---|
| Voltage (V): | 11,1 |
| Weight (g): | 34 |
| Length (mm): | 51 |
| Type: | LiPo |
| Form: | 3S |
| Wide (mm): | 24 |
| Discharge current (C): | 30(60) |
| Height (mm): | 14 |
| Connection: | JST / BEC |
| Balancer plug: | XH |
ROXXY® EVO LiPo batteries - More power, more capacity!
The ROXXY® EVO battery series offers an above-average voltage level, even at high load currents, for noticeably more "pressure". Also the capacity under load, and the total number of cycles of the ROXXY® EVO batteries is extraordinarily high.
Furthermore, the ROXXY®-Evo line is characterized by smaller dimensions and lower weight, with a high C-rate at the same time.
Recommended accessories:
BID-System = Battery IDentification System.
Function:
Each battery is assigned a small, lightweight BID chip, which stores all relevant data for optimal and safe charge/discharge of the battery. For charging or discharging, the BID chip and the battery are connected to a BID charger. The BID system now sets the correct parameters for the POWER PEAK ® BID charger.
The following charging settings are stored in the BID chip/key:
- Battery type (NC, NiMH, LiIo, LiPo, LiFe, lead)
- cell count
- battery capacity
- charging current
- discharge current
- Date (e.g. first start-up)
- Delta Peak Switch-off voltage
- switch-off temperature
The following data is stored in the BID chip/key during each charging process:
- Currently loaded capacity
- Currently discharged capacity
- Maximum charged capacity
- Maximum discharged capacity
- Number of charging cycles
All batteries from different manufacturers can be equipped with ROXXY® BID chips (# 308472).
Scope of delivery
1 ROXXY LiPo battery Evo 3 - 350 30 C with BID-chip, XH balancer, JST/BEC plug
1 manual
Since their founding in 1958, Multiplex has developed top RC Radio Systems for the RC Industry! With the current 2,4 GHz Technology M-LINK and telemetry system, Multiplex has put itself in front of the RC Industry in Germany. Since the early 2000s Multiplex began producing finished models made from Elapor, a high-tech particle foam, which setted a milestone im the RC Airplane, as well as in the Helicopter (Funcopter) sectors. Since 2002, Multiplex has been owned by the south korean HiTEC group and has become one of the leading RC manufacturers in the world!
The ROXXY® EVO battery series offers an above-average voltage level, even at high load currents, for noticeably more "pressure". Also the capacity under load, and the total number of cycles of the ROXXY® EVO batteries is extraordinarily high.
Furthermore, the ROXXY®-Evo line is characterized by smaller dimensions and lower weight, with a high C-rate at the same time.
Recommended accessories:
BID-System = Battery IDentification System.
Function:
Each battery is assigned a small, lightweight BID chip, which stores all relevant data for optimal and safe charge/discharge of the battery. For charging or discharging, the BID chip and the battery are connected to a BID charger. The BID system now sets the correct parameters for the POWER PEAK ® BID charger.
The following charging settings are stored in the BID chip/key:
- Battery type (NC, NiMH, LiIo, LiPo, LiFe, lead)
- cell count
- battery capacity
- charging current
- discharge current
- Date (e.g. first start-up)
- Delta Peak Switch-off voltage
- switch-off temperature
The following data is stored in the BID chip/key during each charging process:
- Currently loaded capacity
- Currently discharged capacity
- Maximum charged capacity
- Maximum discharged capacity
- Number of charging cycles
All batteries from different manufacturers can be equipped with ROXXY® BID chips (# 308472).
Scope of delivery
1 ROXXY LiPo battery Evo 3 - 350 30 C with BID-chip, XH balancer, JST/BEC plug
1 manual
Since their founding in 1958, Multiplex has developed top RC Radio Systems for the RC Industry! With the current 2,4 GHz Technology M-LINK and telemetry system, Multiplex has put itself in front of the RC Industry in Germany. Since the early 2000s Multiplex began producing finished models made from Elapor, a high-tech particle foam, which setted a milestone im the RC Airplane, as well as in the Helicopter (Funcopter) sectors. Since 2002, Multiplex has been owned by the south korean HiTEC group and has become one of the leading RC manufacturers in the world!