Robbe Modellsport RO-POWER ULTRA HP 1800MAH 22,2 VOLT 6S
Product number:
9777574
Manufacturer number:
7396
Robbe Modellsport RO-SAFETY XL LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY
€134.99*
€139.99*(3.57% saved)
| Capacity (mAh): | 1800 |
|---|---|
| Voltage (V): | 22,2 |
| Weight (g): | 270,5 |
| Length (mm): | 106,5-107,5 |
| Type: | LiPo |
| Form: | 6S |
| Wide (mm): | 34,5-39,6 |
| Discharge current (C): | 25(50) |
| Height (mm): | 37,6-39,2 |
| Connection: | XT-60 |
| Balancer plug: | XH |
The new Robbe Ro-Power ULTRA HP and MAXAMP are selected high-performance cells with a novel chemical structure. They have a very low internal resistance and maintain their voltage even under high loads. It goes without saying that the packs are manufactured to the highest quality standards and are manufactured to the highest standards and carefully selected best components.
Thus we can also guarantee a very high cycle stability. The discharge currents (C-rates) are deliberately kept very conservative and can therefore be removed permanently.
The ULTRA HP series is made with 25(50)C for all standard requirements in the entire RC range.
The MAXAMP series has an even higher load capacity of 35(70)C and is used in the high performance range, where higher currents and voltage stability under load are required.
The relatively low weight is another advantage of the Robbe Ro-Power ULTRA series.
Thus we can also guarantee a very high cycle stability. The discharge currents (C-rates) are deliberately kept very conservative and can therefore be removed permanently.
The ULTRA HP series is made with 25(50)C for all standard requirements in the entire RC range.
The MAXAMP series has an even higher load capacity of 35(70)C and is used in the high performance range, where higher currents and voltage stability under load are required.
The relatively low weight is another advantage of the Robbe Ro-Power ULTRA series.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]