WELLPOWER Lipo battery ULTIMA 4200 mAh / 7.4 Volt 2S 35/70C CH5/8 XT-60
Product number:
9786886
Manufacturer number:
4200-2S-35/70C-XT-60
GTIN/EAN:
9010189227892
Description "WELLPOWER Lipo battery ULTIMA 4200 mAh / 7.4 Volt 2S 35/70C CH5/8 XT-60"
Please be aware that this product can only be shipped to the following countries: Austria, Germany, Switzerland, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, France, Greece, Hungary, Italy, Ireland, Luxembourg, Netherlands,Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, and the United Kingdom, Lithuania, Latvia
Please also read our safety notice:
https://www.lindinger.at/en/navigation/37ea30801f564076831f044e67e1fa6f
Please also read our safety notice:
https://www.lindinger.at/en/navigation/37ea30801f564076831f044e67e1fa6f
"WELLPOWER" Lipo batteries with the sensational price, performance ratio! "SE" series = high-quality workmanship + outstanding performance data + best price-performance ratio!
Depending on type -100C loadable (peak current) and charging currents of up to 8 times the nominal capacity make our "Wellpower" Lipos the first choice for the ambitious model builder. Balancer plug system "XH". Version "V2" is supplied as standard with a Liposafe specially manufactured according to battery size (from 1000mAh).
For maximum safety during transport and storage. The battery and Liposafe can even be installed directly in the model. (Note temperature development!).
For price-conscious model builders we offer the "ECO" series especially, with somewhat lower nominal load capacity and without Liposafe, but with the well-known quality features at an unbeatable price. Splitpack´s have two balancer and 4 main power connections. Version "ULTIMA" with real 35C or 60C continuous load and peak between 70C and 90C (1sec.) or 120C (max.0,5sec.) for uncompromising applications like e.g. in competition. "CHECK" version with standard built-in LED voltage indicator for quick test of battery charge status.
Discharge currents "SE/V2": The values in brackets are only valid for short-term load! (max. 5 seconds)
Charge currents: "CHx" Data indicate the maximum permissible charge current. For CH2, for example, twice the value of the rated capacity (i.e. max. 4A for 2.0Ah battery), CH6 six times the value, etc.
Tip:
- The max. continuous discharge current is only recommended with active temperature monitoring!
- Preheating cold batteries increases performance and service life
- Never allow batteries to become hotter than 60°C.
- Recommended bearing voltage 3,70... 3,80 V / cell
- Protect from short circuit, mechanical damage, overheating, deep discharge and overcharging.
- Only charge with a suitable lipolader on a fireproof surface.
- Do not continue to use damaged cells !
- never charge or discharge unattended !
Depending on type -100C loadable (peak current) and charging currents of up to 8 times the nominal capacity make our "Wellpower" Lipos the first choice for the ambitious model builder. Balancer plug system "XH". Version "V2" is supplied as standard with a Liposafe specially manufactured according to battery size (from 1000mAh).
For maximum safety during transport and storage. The battery and Liposafe can even be installed directly in the model. (Note temperature development!).
For price-conscious model builders we offer the "ECO" series especially, with somewhat lower nominal load capacity and without Liposafe, but with the well-known quality features at an unbeatable price. Splitpack´s have two balancer and 4 main power connections. Version "ULTIMA" with real 35C or 60C continuous load and peak between 70C and 90C (1sec.) or 120C (max.0,5sec.) for uncompromising applications like e.g. in competition. "CHECK" version with standard built-in LED voltage indicator for quick test of battery charge status.
Discharge currents "SE/V2": The values in brackets are only valid for short-term load! (max. 5 seconds)
Charge currents: "CHx" Data indicate the maximum permissible charge current. For CH2, for example, twice the value of the rated capacity (i.e. max. 4A for 2.0Ah battery), CH6 six times the value, etc.
Tip:
- The max. continuous discharge current is only recommended with active temperature monitoring!
- Preheating cold batteries increases performance and service life
- Never allow batteries to become hotter than 60°C.
- Recommended bearing voltage 3,70... 3,80 V / cell
- Protect from short circuit, mechanical damage, overheating, deep discharge and overcharging.
- Only charge with a suitable lipolader on a fireproof surface.
- Do not continue to use damaged cells !
- never charge or discharge unattended !
Technical data
| Capacity (mAh): | 4200 |
|---|---|
| Voltage (V): | 7,4 |
| Weight (g): | 212,3 |
| Length (mm): | 140 |
| Type: | LiPo |
| Form: | 2S |
| Wide (mm): | 44 |
| Discharge current (C): | 35(70) |
| Height (mm): | 17 |
| Connection: | XT-60 |
| Balancer plug: | XH |
For years, Wellpower has been the flagship brand of Lithium Polymer (LiPo) Battery Packs from Modellbau Lindinger. They became very popular due to their high performance to cost ratio. Currently, the Wellpower series batteries are being used in the competition scene and flight shows by many professional RC pilots from Team Modellbau Lindinger. With the many types of Wellpower Lipos such as ECO, SE, and DS, Modellbau Lindinger can offer battery packs for every model from beginner class to competition class.