Temperature sensor for IBEX brushless controller
Programmable temperature sensor for IBEX controllers.
Temperature range: -10 to +125°C
Application 1HT125ID is a small temperature sensor that supports multiple telemetry protocols.
It can be used to measure the temperature of the electric motor, batteries, or other components of your model.
Features:- Small dimensions
- The sensor is connected directly to the telemetry port of the receiver
- Minimum/maximum temperature values are recorded
- Automatic telemetry detection: Duplex EX, Hott, MSB, S.Bus2
- Configurable high-temperature alarms
- Configuration via the transmitter
- Firmware updates.
Configurable telemetry slots in S.Bus2 telemetry mode.
To change settings, use the software MAV Manager.
After changing the slot, select the sensor type "T125" and the corresponding slot in your Futaba transmitter.
Application 2The temperature sensor HT125ID is compatible with the IBEX controller series.
The sensor is connected directly to the "A" input of the IBEX controller (see image above). From this point on, the IBEX controller knows the basic motor parameters (minimum acceleration, recommended timing, gear ratio, pole count…) and the motor temperature. Some parameters are automatically adjusted (gear ratio, poles), while others are configured after resetting the controller to factory settings.
Some motor brands (e.g., Hemotec) have the HT125ID temperature sensor built in. This passes the essential parameters to the IBEX controller, thereby protecting the drivetrain from overload or damage – even with temperature monitoring.
The programming of the HT125ID is done via a Jeti Box, Smart Box, or using the Jetibox emulation.
