ROXXY
ROXXY SMART CONTROL 940-6 SV TELEMETRY 2-6S/40A S-BUS 2 INTERFACE
Product number:
9709613
Manufacturer number:
318573
€44.99*
Not in stock. Available only by special order in approx. 7 to 21 business days.
| Cells (LiPo): | 2-6 |
|---|---|
| Cells (NiMH/NiCd): | 5-18 |
| Current duration (A): | 40 |
| Max current (A): | 45 |
| Weight (g): | 47 |
| BEC: | 5-7,4V/5A |
| Length (mm): | 60 |
| Type: | Brushless |
| Wide (mm): | 35 |
| Height (mm): | 16 |
| BEC or OPTO: | BEC |
ROXXY® Smart Control - The intelligent speed controller - 40A
The ROXXY® Smart Control BL controller series offers an integrated telemetry function via the digital S.BUS2 interface. Thus, the ROXXY® Smart Control controller always informs you exactly about the current status of your drive: current, capacity, speed, voltage and temperature are recorded and transmitted to the pilot.
The ROXXY® Smart Control controllers are based on the proven ROXXY® 900 series and offer the same high quality and performance for high-quality drive systems.
The integrated telemetry function replaces 5 separate sensors for current, capacity, speed, voltage and temperature - without additional costs and cabling. The ROXXY® Smart Control controllers have the digital Futaba S.BUS2 interface as standard for easy connection to Futaba telemetry systems. All control signals and also the telemetry data of all integrated sensors run via a connection cable to the receiver or S.BUS system.
Simply install the controller as usual, connect, program, register as sensor in the transmitter and the telemetry data already appear in the transmitter display.
Futaba transmitters can also announce the telemetry data via voice output. Furthermore, alarm values can be set in the transmitter, which are output via an acoustic warning, such as speech, beeper or vibration alarm.
The telemetry data can be recorded to the SD card of all FASSTest® transmitters and thus made available for detailed flight evaluation. Various PC programs are available for evaluation.
Features:
- Optional program card for easy and clear setting of the functions.
- Controller can be switched to internal or external rotor operation, display via LED.
- Timing mode for adaptation to the number of motor poles.
- Brake can be switched on and off, with adjustable braking force.
- High switching frequency for sensitive control, e.g. for "torques
- An integrated temperature protection protects against thermal defects.
- equipped with the usual protection and filter functions, such as POR startup protection and RX filter
- Adapted to the BL motor series ROXXY®, but can also be used for other BL motors, since these controllers have almost no more restrictions on the number of motor poles.
- Adjustable soft start
- Integrated sensors: current, capacity, speed, voltage and temperature
- Digital S.BUS interface
- Of course, the controller can also be connected to normal PWM receiver outputs, the S.BUS interface can understand both signals, but then without telemetry function.
The ROXXY® Smart Control BL controller series offers an integrated telemetry function via the digital S.BUS2 interface. Thus, the ROXXY® Smart Control controller always informs you exactly about the current status of your drive: current, capacity, speed, voltage and temperature are recorded and transmitted to the pilot.
The ROXXY® Smart Control controllers are based on the proven ROXXY® 900 series and offer the same high quality and performance for high-quality drive systems.
The integrated telemetry function replaces 5 separate sensors for current, capacity, speed, voltage and temperature - without additional costs and cabling. The ROXXY® Smart Control controllers have the digital Futaba S.BUS2 interface as standard for easy connection to Futaba telemetry systems. All control signals and also the telemetry data of all integrated sensors run via a connection cable to the receiver or S.BUS system.
Simply install the controller as usual, connect, program, register as sensor in the transmitter and the telemetry data already appear in the transmitter display.
Futaba transmitters can also announce the telemetry data via voice output. Furthermore, alarm values can be set in the transmitter, which are output via an acoustic warning, such as speech, beeper or vibration alarm.
The telemetry data can be recorded to the SD card of all FASSTest® transmitters and thus made available for detailed flight evaluation. Various PC programs are available for evaluation.
Features:
- Optional program card for easy and clear setting of the functions.
- Controller can be switched to internal or external rotor operation, display via LED.
- Timing mode for adaptation to the number of motor poles.
- Brake can be switched on and off, with adjustable braking force.
- High switching frequency for sensitive control, e.g. for "torques
- An integrated temperature protection protects against thermal defects.
- equipped with the usual protection and filter functions, such as POR startup protection and RX filter
- Adapted to the BL motor series ROXXY®, but can also be used for other BL motors, since these controllers have almost no more restrictions on the number of motor poles.
- Adjustable soft start
- Integrated sensors: current, capacity, speed, voltage and temperature
- Digital S.BUS interface
- Of course, the controller can also be connected to normal PWM receiver outputs, the S.BUS interface can understand both signals, but then without telemetry function.