EMCOTEC Battery backer DPSI RV Mini 5
Product number:
9793096
Manufacturer number:
A11030-1
- 1 DPSI RV Mini 5 battery backer
- 5 patch cables (6.7in) to the receiver
- 1 quick reference guide
Dual power supply with servo current distribution and servo signal distribution of five receiver channels to eight servos.
DPSI switch actuator for switching on and off
For switching on and off the DPSI RV Mini System an additionally available DPSI switch actuator is necessary (see "Accessories" tab). The DPSI switch actuator is not included within delivery contents. The following DPSI switch actuators are available:
Hint:
The switching off process of DPSI works with a hall effect sensor. Hall effect sensors can be influenced by magnet fields. It is possible that the DPSI switches off when exposed to a very strong magent field (i.g. electric drive). Current-carrying cables generate a magnet field. So please run all cables which are carrying a high current (>100A) with a distance of at least 3cm (1.18in) from the DPSI.
*Notice concerning the Remote switch actuator: The DPSI Remote switch actuator (Duplex) can only be used with JETI Duplex systems. Usage with other manufacturer's systems is not possible. Delivery includes only the EMCOTEC RCSW adapter for connecting the JETI Duplex RCSW RC switch to the DPSI dual power supply. The JETI Duplex RCSW RC switch which is necessary to switch the DPSI dual power supply on and off must be purchased separately (see Accessories).
Specifications:
Application scope
Security finally has a name - Emcotec! Quality Made in Germany since 1988. Emcotec develops products, from their own production, for the RC market in the highest quality. Top pilots from all over the world trust Emcotech with their power supplies and electronic switches.
DPSI switch actuator for switching on and off
For switching on and off the DPSI RV Mini System an additionally available DPSI switch actuator is necessary (see "Accessories" tab). The DPSI switch actuator is not included within delivery contents. The following DPSI switch actuators are available:
- DPSI pin switch actuator
- DPSI magnetic switch actuator (housing)
- DPSI magnetic switch actuator (PCB)
- DPSI gas cap switch actuator
- DPSI remote switch actuator (Duplex)*
Hint:
The switching off process of DPSI works with a hall effect sensor. Hall effect sensors can be influenced by magnet fields. It is possible that the DPSI switches off when exposed to a very strong magent field (i.g. electric drive). Current-carrying cables generate a magnet field. So please run all cables which are carrying a high current (>100A) with a distance of at least 3cm (1.18in) from the DPSI.
*Notice concerning the Remote switch actuator: The DPSI Remote switch actuator (Duplex) can only be used with JETI Duplex systems. Usage with other manufacturer's systems is not possible. Delivery includes only the EMCOTEC RCSW adapter for connecting the JETI Duplex RCSW RC switch to the DPSI dual power supply. The JETI Duplex RCSW RC switch which is necessary to switch the DPSI dual power supply on and off must be purchased separately (see Accessories).
Specifications:
- Power sources5, 6, (7)-zellige NiCd / NiMH Zellen, 2-zellige Lithium-Ion-Akkus, Lithium-Polymer-Akkus, LiFePo-Akkus
- Operating voltage range5,0V bis 13V
- Nominal input voltage6,0V bis 8,4V
- Quiescent current (switched off)ca. 1µA pro Akku
- Quiescent current (switched on)ca. 55mA
- Max. permanent current @ 5.9V5A
- Max. peak current @ 5.9V50A
- Umgebungsbedingungen-10°C bis +50°C
- Zulässiger Temperaturbereich-25°C bis +85°C
- CE-Prüfunggemäß 2004/108/EC
- Dimensions77 x 99 x 15,8mm
- Weightca. 105g
- Drop-Out-Verluste @ 4A0,4V
- LCL-Filterung (EMI)für jeden einzelnen Servoausgang
- Störsignalunterdrückung bei 35MHz-20dB bei 35MHz, -34dB bei 100MHz
- Schraubdurchmesser für die Befestigung4 x 4,2mm
- Lochabstand für die Befestigung78,7 x 67,7mm
- Ausgangsspannung Empfänger5,2V oder 5,9V per Jumper einstellbar
- Ausgangsspannung Servos5,9V oder volle Akkuspannung per Jumper einstellbar
Application scope
- Anzahl Servosbis zu 10 Servos
Security finally has a name - Emcotec! Quality Made in Germany since 1988. Emcotec develops products, from their own production, for the RC market in the highest quality. Top pilots from all over the world trust Emcotech with their power supplies and electronic switches.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]