DPSI RV Mini 5 Magic
Dual power supply with current distribution from 5 receiver channels to 8 servos (additional servos can be connected directly to the receiver).
Integrated servo matching: the slave servos which are operated on the match channels can be matched to the respective master servos in direction of rotation, centre position and full travel. Simple programming of the servo settings using the magnet supplied. No PC or programming device necessary.
Up to 50A peak current for optimum servo actuating force. Fail-safe electronic circuit breakers with the proven pin switch sensor - the switching process is carried out without the involvement of a microcontroller (CSHC). Regulated output voltage for use with all types of batteries.
Separate voltage for receiver and servos (SDVS - Selectable Dual Voltage Supply): receiver voltage switchable between 5.2V and 5.9V, servo voltage switchable between 5.9V and 7.4V.
LowDropOut technology for minimum losses and maximum power. Integrated protection against the servo "dynamo effect". Impulse amplifier for weak servo signals - ideal for 2.4GHz systems.
HF interference suppression (HFIB - HF Interference Blocking). Voltage monitoring with battery failure detection (IVM - Intelligent Voltage Monitoring).
The battery type used is easily programmable (NiCd, NiMH, LiIon, LiPo or LiFePO4). Visual and audible fault indication. High-quality plastic housing.
Technical data
Power sources 5, 6, (7)-cell NiCd / NiMH cells, 2-cell lithium-ion batteries, lithium-polymer batteries, LiFePo batteries
Operating voltage range 5.0V to 13V
Rated input voltage 6.0V to 8.4V
Quiescent current (switched off) approx. 1µA per battery
Quiescent current (switched on) approx. 55mA
Max. continuous current @ 5.9V 5A
Max. peak current @ 5.9V 50A
Drop-out losses @ 4A 0.4V
Ambient conditions -10°C to +50°C
CE-testing according to 2004/108/EC
Permissible temperature range -25°C to +85°C
Output voltage receiver 5.2V or 5.9V adjustable by jumper
Output voltage servos 5.9V or full battery voltage adjustable by jumper
LCL filtering (EMI) for each individual servo output
Interference signal suppression at 35MHz -20dB at 35MHz, -34dB at 100MHz
Dimensions 77 x 99 x 15,8mm
Screw diameter for mounting 4 x 4,2mm
Hole spacing for mounting 78,7 x 67,7mm
Weight approx. 105g
Application range: Number of servos up to 10 servos
ATTENTION
The switch-off process of the DPSI works with a Hall sensor. Hall sensors react to magnetic fields. In case of very strong magnetic fields (e.g. electric drive) the DPSI may switch off under certain circumstances. Current carrying cables generate a magnetic field. Therefore, please lay all cables that carry a very high current (>100A) at a distance of at least 3cm past the DPSI.
Security finally has a name - Emcotec! Quality Made in Germany since 1988. Emcotec develops products, from their own production, for the RC market in the highest quality. Top pilots from all over the world trust Emcotech with their power supplies and electronic switches.
