DPSI RV Mini 6 MagicDual power supply with power distribution from 6 receiver channels to 7 servos (additional servos can be connected directly to the receiver).
Integrated servomatching: The slave servos that are operated on the match channels can be adapted to the respective master servos in the direction of rotation, middle position and final deflection. Easy programming of the servo settings with the supplied magnet. No PC or programming device required.
Up to
50A peak current for optimum servo positioning force. Fail-safe electronic circuit-breakers with the proven pin-switch sensor - the switching process takes place without the involvement of a microcontroller (CSHC). Controlled output voltage for the use of all battery types.
Separate voltage for receiver and servos (SDVS - Selectable Dual Voltage Supply): receiver voltage switchable between 5.2V and 5.9V, servo voltage switchable between 5.9V and 7.4V.
LowDropOut technology for minimum losses and maximum performance. Integrated protection against the servo "dynamo effect". Pulse amplifier for weak servo signals - ideal for 2.4GHz systems.
HF interference suppression (HFIB - HF Interference Blocking). Voltage monitoring with battery failure detection (IVM - Intelligent Voltage Monitoring).
The type of battery used is easily programmable (NiCd, NiMH, LiIon, LiPo or LiFePO4). Optical and acoustic error indication. High-quality plastic housing.
Technical Data - Power sources 5, 6, (7)-cell NiCd / NiMH cells, 2-cell lithium-ion batteries, lithium-polymer batteries, LiFePo batteries
- Operating voltage range 5.0V to 13V
- Rated input voltage 6.0V to 8.4V
- Quiescent current (switched off) approx. 1µA per battery
- Quiescent current (switched on) approx. 55mA
- Max. Continuous current @ 5.9V 5A
- Max. Peak current @ 5.9V 50A
- Drop-out losses @ 4A 0.4V
- Ambient conditions -10°C to +50°C
- CE-approved according to 2004/108/EC
- Permissible temperature range -25°C to +85°C
- Output voltage receiver 5.2V or 5.9V adjustable by jumper
- Output voltage servos 5.9V or full battery voltage adjustable via jumper
- LCL filtering (EMI) for each individual servo output
- Interference suppression at 35MHz -20dB at 35MHz, -34dB at 100MHz
- Dimensions 77 x 99 x 15,8mm
- Screw diameter for mounting 4 x 4.2mm
- Hole spacing for mounting 78.7 x 67.7mm
- Weight approx. 105g
- Range of application: Number of servos up to 10 servos
WARNING!!
The switch-off process of the DPSI works with a Hall sensor. Hall sensors react to magnetic fields. In case of very strong magnetic fields (e.g. electric drive) the DPSI may switch off. Current-carrying cables generate a magnetic field. Therefore, please lay all cables that carry a very high current (>100A) at a distance of at least 3cm past the DPSI.
Security finally has a name - Emcotec! Quality Made in Germany since 1988. Emcotec develops products, from their own production, for the RC market in the highest quality. Top pilots from all over the world trust Emcotech with their power supplies and electronic switches.
