The Chargery SUPER BEC is a very powerful BEC with interesting safety features. Depending on the model, it provides a continuous current of up to 10, 15, or 20A with an input voltage of up to 58V. The Chargery SUPER BEC operates with high efficiency and is designed for safe use with all proven 2.4 GHz RC receivers as well as modern servos. It combines safety with a constant power supply for your RC model, eliminating the need for an external receiver battery. This improves the power-to-weight ratio of your RC model. The Chargery SUPER BEC is perfectly adapted to the needs of current high-current digital servos.

Features of the 20A version: • High efficiency at 5.5V, 6V, 7.4V, and 8.4V output voltage • Wide input voltage range from 9V to 58V (3 to 14 LiPo cells). The minimum input voltage at 8.4V output voltage is 12V • Maximum continuous current of 20 amps - short-term 25A possible with adequate ventilation • Intelligent current and temperature overload protection with a soft drop in output voltage • Short-circuit protection at both input and output • Microprocessor-controlled overvoltage protection at the output - if the voltage rises above >10V, the BEC electronics are completely disconnected from the input voltage, and the output voltage is shut down in 0.1µs (0.0000001 seconds) • Less than 1mA quiescent current consumption • Aluminum housing with effective cooling surface • A LED status indicator provides visual feedback • Compact size: L58W45H21mm • Weight: 70g (without cables) • Can be easily combined with any backup system, as long as its output voltage is lower than the BEC output voltage (use Schottky diodes, e.g., SB1540 - 15A, 40V or SBX2040 - 20A, 40V)