The motto when developing the Safety Switch PRO was "keep it simple".
No PC or other aids are required: Buy, install, fly, done.
The power supply was kept as compact as possible, so that it also finds its place, for example, in sailors. Nevertheless, it was important to us to give the Safety Switch Pro an elegant design.
We achieved this with the help of the aluminum housing, which also guarantees very good heat dissipation.
As a switching element, you can choose the right one for you and your application from our two safety switches.
(# 1-01784 Magnetic safety switch / # 85195 Micro safety switch)
The scope of delivery includes an additional plug-in LED cable with a 3mm flat head LED to display the switching status.
The safety switches are designed for a continuous current of 15A and 30A peak.
Since the receiver connection cable is the limiting factor here, the Twinbatt version is also available with an M6 high-current plug connection. Here the continuous current load is 35A and the permissible peak is 60A.
The Safety Switch PRO is an extremely reliable and safe power supply for your model.
Trust in our many years of experience.
Features:- High-voltage power supply (input voltage = output voltage) SMD technology, low-wear, vibration-resistant
- High-quality gold-plated connector systems and large cable cross-sections
- High continuous current load due to large-area cooling via the milled aluminum housing
- Low power loss due to "ideal" diodes simulated by FET.
- Safe battery connection through MPX M6 connector and safety
clips • Compact construction and elegant design
- Two receiver connection cables for double the wire cross-section and double the number of contacts with SAFETY-SWITCH PRO
- MPX M6 high-current connection with SAFETY-SWITCH PRO TwinBatt (M6) for direct connection to the MULTIPLEX receiver RX-9/12/16-DR pro M-LINK or other receivers established on the market with M6 input.
- Integrated battery switch in the SAFETY-SWITCH PRO TwinBatt. The batteries are discharged evenly at the same voltage level.
- If one battery fails, the second battery takes over the receiver power supply alone.
- Switch connection socket for free selection of your MPX switch.
- (Magnetic safety switch / Micro safety switch)
- LED status display on the housing
- Additional plug-in LED cable with a 3mm flat head LED to display the switching status
Since their founding in 1958,
Multiplex has developed top
RC Radio Systems for the RC Industry! With the current 2,4 GHz Technology
M-LINK and
telemetry system, Multiplex has put itself in front of the RC Industry in Germany. Since the early 2000s Multiplex began producing finished models made from
Elapor, a high-tech particle foam, which setted a milestone im the RC Airplane, as well as in the Helicopter (
Funcopter) sectors. Since 2002, Multiplex has been owned by the south korean HiTEC group and has become one of the leading RC manufacturers in the world!
