NEWS

The Futaba R3001SB is a compact and lightweight T-FHSS 2.4 GHz receiver with integrated telemetry function. Due to the super slim design, the receiver is excellently suited for multi-copters.

Up to 18 programmable S.BUS servos or peripheral devices such as gyros or flight controllers can be connected to the S.BUS output. With digital addressing, each servo reacts only to information that contains the correct servo address. No more tangled cables, one cable to the surface, on larger models one cable per surface and one cable to the rear. It couldn't be simpler. This cable-saving and therefore also weight-saving method can of course also be achieved with previous analogue or digital standard servos. All you need is a PWM adapter that converts the signal from S.BUS to PWM.

The R3001SB has an antenna diversity and constantly checks the signal quality of both antenna inputs. In this way, the system switches to the better input signal at lightning speed and without any transitions.

S.BUS2 sensors can be connected via the S.BUS2 connection and up to 32 telemetry data sets can be transmitted. The telemetry transmitter integrated in the receiver transmits the telemetry data at the S.BUS2 connection to the transmitter, which displays, announces or emits them acoustically.

NOTE: When using 7.4 V LiPo batteries as receiver battery, the connected servos must also be designed for this voltage. The receiver has no internal voltage converter for the servo voltage!



Technical Specifications


Frequency band: 2.4 GHz | Transmission system: T-FHSS | Number of channels: 1 PWM / 18 S.BUS | S.BUS output: S.BUS / S.BUS2 | Voltage range: 4.8 - 8.4 V | Dimensions: 41.8 x 21.1 x 5.3 mm | Weight: 4.2 g


features

• 1/18-Channel T-FHSS 2.4 GHz Telemetry Receiver with S.BUS2
• telemetry function
• S.BUS / S.BUS2 output
• Hi-Voltage
• Antenna Diversity
• Full range