The 10-channel telemetry receiver KAVAN R10 operates with a simultaneous dual-frequency transmission system, Twin 2.4 GHz. It features 8 high-precision PWM channels and a 16- or 24-channel mode via S.BUS. Two detachable antennas with IPEX4 connectors ensure full signal strength over a range of up to ten kilometers. It is especially suitable for gliders but can also be used for other models. With redundancy support, it can be connected as the primary receiver via S.BUS. In this connection, both receivers work simultaneously with the Twin 2.4GHz protocol. Thanks to the F.BUS connection option, it can also be easily and quickly connected to multiple telemetry devices, enabling bidirectional data transmission over a single cable.

It has advanced interference suppression for reliable, stable signal transmission over the entire range. The intelligent allocation of the transmission system speeds up the binding process. The blackbox function stores basic flight data. The operating states of the receiver are displayed via an LED indicator. Intelligent binding allows wireless firmware updates.

It is also available in a non-stabilized version (#KAV18.10010 R10). The R10 Stabi offers enhanced ADV stabilization features. The ADV stabilization provides an advanced mode with a set of programmable stabilized channels and a wide range of applications.

The classic stabilization mode has been expanded with 5 additional stabilization channels, enabling pin mapping for each channel in certain flight modes such as stabilization, auto-level (hold level), hover, and knife-edge (knife flight) for aircraft models.

Advanced stabilization features include high-precision telemetry sensors to monitor altitude, vertical speed, etc.

In ADV mode, all output pins for stabilization and other advanced functions are configurable, such as sharing stab files, programmable parameters, and access for developers, etc.

Specifications:

• RF transmission system: Twin 2.4 GHz
• Dimensions: 64×16.6×12.4 mm (L×W×H)
• Weight: 9.4 g
• Operating voltage: 3.5–12 V (recommended battery: 2S LiXX)
• Operating current: ?120 mA at 5 V
• Vario - Vertical speed measurement range: ±10 m/s
• Vario - Altimeter range and resolution: -700 m to 10,000 m, 0.1 m
• External voltage measurement range via AIN2: 0–35 V
• Antenna connection: IPEX4
• Compatibility: Twin 2.4 GHz
• Max. radiation power: < 20 dBm
• Operating frequency: 2.400–2.4835 GHz

Functions:

• Increased protection against RF interference and more stable RF transmission
• Simultaneous 2.4 GHz dual-frequency transmission system with intelligent binding
• Integrated advanced stabilization features (R10 Stabi)
• Built-in high-precision telemetry sensors (altitude, vertical speed, etc.)
• Blackbox function
• High maximum operating range
• Wireless firmware updates (OTA - OverTheAir)
• 10 configurable channels
• CH1: PWM / S.BUS OUT / FPort / S.Port / SBUS IN
• CH2–10: PWM / SBUS OUT / FBUS / S.Port
• F.BUS / S.Port
• SBUS OUT port (supports 16/24CH mode)
• SBUS IN port (supports signal redundancy)