FEATURES

• Fast
• Crystal clear
• Very strong
• Universally applicable for many materials
• Temperature resistant from -40 °C to +100 °C
• Fills gaps
• Waterproof
• Resistant to chemicals
• Paintable

APPLICATION AREA
SUITABLE FOR:
Ideal for quickly, strongly, and invisibly repairing various materials, such as ceramics, porcelain, glass, leather, wood, stone, and metal. Bonds different materials to each other and among themselves.

NOT SUITABLE FOR:
Not suitable for polyethylene (PE), polypropylene (PP), PTFE, and silicone rubber.

PREPARATION
Processing Conditions
Use only at temperatures between +5 °C and +35 °C. The product hardens as soon as the binder and hardener are mixed.

Personal Safety
It is recommended to wear gloves.

Surface Requirements
The surfaces to be bonded must be dry, clean, free of dust and grease.

Surface Preparation
Degrease the items to be bonded with denatured alcohol. Roughen smooth surfaces first (sandpaper).

Tools
Mix the components in the supplied mixing tray with the spatula.

Mixing Ratio
1:1

Consumption
1 ml = approx. 10 cm² at a thickness of 1 mm

PROCESSING:
Instructions for Use
Press an equal amount of both components into the provided mixing tray. Mix both components thoroughly with the plastic spatula until a mixture with a homogeneous color is obtained. Spread the mass, which can be processed at room temperature (+20 °C) for about 5 minutes, in a thin layer on one of the two materials. Connect the parts immediately and press them firmly together. Hold the objects in the same position for at least 10 minutes. Do not move during the curing process. The adhesive bond will be hand-tight after about 20 minutes and fully cured after about 12 hours (at 20 °C). Do not use the product at temperatures below +15 °C.

Tips
Some plastics, such as polyethylene and polypropylene, cannot be glued. You can test the type of plastic by holding a heated copper wire against it. If a typical wax smell is produced, the plastics are not bondable. Use tape to hold the parts to be bonded in position during the curing time.

Please Note
After use, close tightly. For optimal adhesive results, it is important to mix a slightly larger amount of adhesive. The curing time depends on the temperature. Adhesive will not cure below +5 °C.

Stains/Residues
Remove wet stains immediately with warm soapy water. Cured adhesive residues can only be removed mechanically.

Storage Conditions
Store the adhesive tightly closed and upright (tip upward) in a cool, frost-free place.

Status: 12/2023
2.2 Labeling Elements 3/2019:
Labeling according to Regulation (EC) No. 1272/2008
Classification according to EC Regulation 1272/2008 (CLP)

Binder/Resin:
Signal word: Warning
Pictograms: GHS07, GHS09

Hazard Statements
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause allergic skin reactions.
H411 Toxic to aquatic life with long-lasting effects.

Precautionary Statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing vapor.
P280 Wear protective gloves.
P302+P352 IF ON SKIN: Wash with plenty of water and soap.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Additional Information:
Contains epoxy compounds. May cause allergic reactions.

Hazardous Components for Labeling:
Reaction product: Bisphenol-A-epichlorohydrin resins with an average molecular weight of ? 700

2.3 Other Hazards
Results of the PBT and vPvB assessment
? PBT: Not applicable.
? vPvB: Not applicable.

Hardener:
2.2 Labeling Elements 3/2019:
Labeling according to Regulation (EC) No. 1272/2008
Classification according to EC Regulation 1272/2008 (CLP)

Signal word: Warning
Pictograms: GHS07

Hazard Statements
H302 Harmful if swallowed.
H315 Causes skin irritation.
H317 May cause allergic skin reactions.
H319 Causes serious eye irritation.

Precautionary Statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P280 Wear protective gloves.
P302+P352 IF ON SKIN: Wash with plenty of water and soap.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Hazardous Components for Labeling:
2,4,6-Tris-(dimethylaminomethyl)phenol