- Hard elastic, good edge strength
- Excellent grinding and polishing properties
- Thixotropic (non-drip)
- Manufactured in vacuum, so optimally free of air bubbles and homogeneous
This two-component epoxy resin is coloured black for gelcoats (applied thickness 0.5–1 mm) in mould construction with high edge strength and good polishing properties. Mould resin P is processed and cured at room temperature, in combination with Hardener EPH 161-P a post-curing (with the laminate backing) approx. 15 hours at at least 40 °C follows. It can be used as a top layer in conjunction with epoxy resin laminates and laminating ceramics. In contrast to resin and metal systems, the surfaces are polishable. This tooling gelcoat is hard-elastic, i.e. not brittle, and exhibits good edge strength.
- Consumption: approx. 0.5-1 kg/m²
Processing:
Hardener P:- 30 minutes processing time yielding surfaces resistant to styrene
Hardener EPH 161-P:- 90 minutes processing time for enhanced heat distortion properties, surfaces not resistant to styrene
Please order the hardeners P or EPH 161 separately
