R&G EP CASTING RESIN + HARDER WATER CLEAR PLUS
Product number:
9767047
Manufacturer number:
1071032
GTIN/EAN:
4901335025552
Description "R&G EP CASTING RESIN + HARDER WATER CLEAR PLUS"
Please be aware that this product can only be shipped to the following countries: Austria, Germany, Switzerland, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, France, Greece, Hungary, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, and the United Kingdom,Ireland!
EP casting resin + hardener "water clear PLUS" (240 min), working package
Two-component, clear, colorless epoxy resin system
- Exceptionally good UV resistance
- High transparency
- Polishable, hard surfaces
- Very good impact strength
- Lowest shrinkage for low-stress castings
- Completely tack-free curing even in thin layers
Epoxy casting resin "water clear PLUS" was specially developed for casting resin applications such as "River Tables". The system can be used for very thick layers. Larger volumes, such as the usual layer thicknesses of 50 mm and more in the manufacture of table tops, are possible in one casting.
Epoxy casting resin "water clear PLUS" has a very low exothermic (very low heat development) with good curing at room temperature and does not have to be post-treated with heat. The casting system can be demoulded after approx. 24 hours and has a glass transition temperature (heat resistance) of 56 °C.
The shrinkage during hardening is very low and the castings are therefore largely stress-free and dimensionally stable. The resistance to yellowing (UV resistance) is exceptionally high.
Pot life: approx. 240 minutes
Mixing ratio:
100 : 38 parts by weight resin to hardener
Curing time: approx. 24 hours
Temperature during curing: min. 16 °C
Two-component, clear, colorless epoxy resin system
- Exceptionally good UV resistance
- High transparency
- Polishable, hard surfaces
- Very good impact strength
- Lowest shrinkage for low-stress castings
- Completely tack-free curing even in thin layers
Epoxy casting resin "water clear PLUS" was specially developed for casting resin applications such as "River Tables". The system can be used for very thick layers. Larger volumes, such as the usual layer thicknesses of 50 mm and more in the manufacture of table tops, are possible in one casting.
Epoxy casting resin "water clear PLUS" has a very low exothermic (very low heat development) with good curing at room temperature and does not have to be post-treated with heat. The casting system can be demoulded after approx. 24 hours and has a glass transition temperature (heat resistance) of 56 °C.
The shrinkage during hardening is very low and the castings are therefore largely stress-free and dimensionally stable. The resistance to yellowing (UV resistance) is exceptionally high.
Pot life: approx. 240 minutes
Mixing ratio:
100 : 38 parts by weight resin to hardener
Curing time: approx. 24 hours
Temperature during curing: min. 16 °C