Quantity / Length in meters: | 1 l |
---|---|
Besondere Kennzeichnung: | EUH066 |
Gefahrenhinweise: | H226, H304, H335, H336, H411, H412 |
Sicherheitshinweise: | P210, P261, P331 |
Piktogramme: | GHS02, GHS07, GHS08 |
Please be aware that this product can only be shipped to the following countries: Austria, Germany, Switzerland, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, France, Greece, Hungary, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, and the United Kingdom,Ireland!
Properties:
Sprayable solvent-based release agent. Dispersion of waxes in a mixture of solvents, free from silicone!
Advantages:
- Excellent release
- Minimal cleaning stops
- Easy handling
- Economic in use
Processing:
The content of the drum must be well stirred before and during use. The release agent should be at room temperature before processing. Before first coating is applied the mould should be cleaned carefully. The release agent can be applied by hand (paintbrush/cloth) or by spray gun.
Before polishing the mould surface the release film has to be dried on. New or cleaned moulds should be sealed with the Release Agent 5 - 6 times before filling the mould to give a good base coating.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
R&G
Faserverbundwerkstoffe GmbH
Im Meißel 7-13
71111 Waldenbuch
DEUTSCHLAND
Tel: +49/7157/53046-0
[email protected]
R&G TRENNWACHS 1LITER Canister/1 Litre
Product number:
11256
Manufacturer number:
1651002
€31.62*
Content:
1 l
In stock. Usually ships within 1 business day.
Additionally selected items:
Quantity / Length in meters: | 1 l |
---|---|
Besondere Kennzeichnung: | EUH066 |
Gefahrenhinweise: | H226, H304, H335, H336, H411, H412 |
Sicherheitshinweise: | P210, P261, P331 |
Piktogramme: | GHS02, GHS07, GHS08 |
Release agent for epoxy and polyester resins
Properties:
Sprayable solvent-based release agent. Dispersion of waxes in a mixture of solvents, free from silicone!
Advantages:
Processing:
The content of the drum must be well stirred before and during use. The release agent should be at room temperature before processing. Before first coating is applied the mould should be cleaned carefully. The release agent can be applied by hand (paintbrush/cloth) or by spray gun.
Before polishing the mould surface the release film has to be dried on. New or cleaned moulds should be sealed with the Release Agent 5 - 6 times before filling the mould to give a good base coating.
Properties:
Sprayable solvent-based release agent. Dispersion of waxes in a mixture of solvents, free from silicone!
Advantages:
- Excellent release
- Minimal cleaning stops
- Easy handling
- Economic in use
Processing:
The content of the drum must be well stirred before and during use. The release agent should be at room temperature before processing. Before first coating is applied the mould should be cleaned carefully. The release agent can be applied by hand (paintbrush/cloth) or by spray gun.
Before polishing the mould surface the release film has to be dried on. New or cleaned moulds should be sealed with the Release Agent 5 - 6 times before filling the mould to give a good base coating.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
R&G
Faserverbundwerkstoffe GmbH
Im Meißel 7-13
71111 Waldenbuch
DEUTSCHLAND
Tel: +49/7157/53046-0
[email protected]